Separate names with a comma.
I was just thinking about this and your previous CO reading...is that corrected for power factor or is that raw amps at a very low power factor?...
Well, I picked up the plug-in LED Kidde CO detector/alarm with 9V battery backup (7 year lifetime for the detector.) It looks like it is pulling...
I normally wouldn't even look at a brand new model in its first year and especially so soon after buying the previous model...but I would like to...
Temperature will play a role as well. In cold weather there are not many amps coming from the traction battery...until the battery warms up....
jayman, If it is really pulling ~15 watts when operating properly do you really want a replacement? I didn't ask what the Kidde combined CGA/CO...
Spent 20 minutes on hold with Kidde. The rep. said that their current line of plug-in CO monitors pulls 0.75 watts (both LED and non-display...
jayman, I'm looking at $420 installed for the new coil and TXV. I'm planning to have this done if he gives the aged compressor a clean enough...
123 kwh/yr for a CO monitor seems a bit over the top doesn't it? Granted, your electric is cheap, but even a battery powered unit would make more...
Is that 122 mA off of the 110/120V? That's a fair bit of power!
The K&N person's point was valid. The mass flow sensor stuff is FUD from what I've seen. Jayman, my 240's air intake was behind the headlight...
I need to replace a very old CO monitor that I doubt is even registering. I was planning to do this as a plug in AC type with digital display. I...
I would like to see dyno results as well, but I'm not sure how one would do that with a Prius considering its drive system. Someone with a scan...
Yep, I've got a Motorola box. When the teaser package ended at my previous residence I gave the cable folks back their box and used the TV's...
Never had a problem with is on my Nissan. And there was a very noticeable and measurable performance improvement (around 0.5 sec 0-60, roughly...
I've got the cable set top box on a powerstrip now and so far it is working well. It does take about 20 minutes for the Guide to fully load, but...
Tom, I found this about set top boxes and thought you would find it interesting:...
Well, I put two sets of PC's speakers, a printer, router, and modem all on a powerstrip so that I can shut them completely down. They total 15W...
That would be pricey. I know my UPS's are a substantial part of my vampire loads. My smaller one uses about 6W while the big one takes 25W! (Edit:...
Measured my cable box today at 15W on and off (only difference is the display is gone when it is off...consistent with what I saw with when...
Tom, that sounds like one of the old boxes since it takes so long to reset. You can probably swap it out for a newer one. This of course depends...
