Separate names with a comma.
I use ramps to change my oil, or the front center jacking point and jackstands, depending on my mood. Ramps work well, if that's the way you want...
I used a fuel rated line, no problem. Try making sure everything is sealed/clamped well first. I highly recommend this product on all threads,...
You can look up the sizes and types of all the lights on Sylvania.com .
Might be something easy. I had a knocking, rattling sound after cleaning the intake manifold, changing and relocating the PCV valve, and...
What year, 2010 or 2011? Also, how are you going to decide which HV battery is in better condition? Or are you going to keep both? Posted via...
I agree, the EGR cooler and EGR valve are early. Our Prius at 125k on the odometer was only about 50-60% clogged, and the EGR pipe wasnt bad at...
194 for incandescent bulbs, there are several equivalent sizes for LED like T10. .
Yeah, I've noticed that another item on my Subscribe and Save has gone up in price as well. .
I wonder if all the thermal cycles of heating/cooling, expanding/contracting of the materials surrounding the plugs makes it very snug over time?...
Please post your rate of accumulation in your oil catch can. I'd like to see if my PCV valve relocation had any affect on it. Posted via the...
Hmm, I just checked the K&N filter I've been getting through Amazon subscribe and save. The price of the filter has gone up steadily from under $5...
+1 on 4.4 quarts added following oil and filter change. Slightly underfilling is better than overfilling. .
Have you cleaned the intake manifold and the EGR/valve and cooler as well? If not I'd do those, or that catch can is like lipstick on a pig....
I just did my own spark plugs at 124k,using Nutz About Boltz's video(s) on this website. Cost me twenty something for Bosch Double Iridium plugs...
I've used both types, doesn't seem to make much difference. Currently, I'm using a K&N purchased through Amazon's subscription service on both my...
Or grease, like the silicone brake slide pin lube. Well, of course that would be AFTER you get it out. For next time. Posted via the PriusChat...
What year is your Prius? My 2011 doesn't have the bleed valve. .
I had to remove and reinstall the EGR cooler I just swapped today. Even with the bottom stud and nut removed, there's not enough clearance to...
Maybe, I put the cap back on on the reservoir. I also revved the engine a bit, several times, to maybe 3000 rpm or so for a few seconds, to...
I didn't bleed any of air through a non-existant bleed valve, or disconnect any tubing to let out air. Filled the coolant reservoir up to the B...
