Separate names with a comma.
Already done, I was referring to the main underbody panel up front. Most of the fasteners are screws and bolts already, but there's still a few...
I'm thinking of installing some stainless steel threaded inserts (rivnuts) and using stainless screws to hold everything in place. Posted via the...
Super long thread, but info within is good, especially for ideas on locations on where to put one. https://priuschat.com/index.php?posts/2545478...
The price quoted for transmission drain/fill is outright gouging. It's easy, almost as easy as an oil change, especially with access to a lift....
Are you handy with tools? The top 4 items on your list are all pretty easy for someone who knows how to swing a wrench. Nutz about boltz has some...
With that style of foglight blank, it's a 2010/11. Probably a ton of miles on the odometer. With that much carnage to the front underside, it...
Metal = aluminum? .
Who put the old oil filter on? Was that done by Jiffy Lube too? Or was that one a DIY? .
Wow, that's pretty nasty looking for 120k miles on the odometer. Ours is at 124k now, and still have to get to the EGR cooler swap. I have one...
Or, it could be a trap setup by a police sting operation. .
You can see where the clips go on the original shield by looking at the position of the 4 large rivets on my cat shield installation. Keep in mind...
The shield is held on with 4 large sized plastic push pin panel clips, or whatever they're called. You don't need to buy a new one, just pick up...
That heatdhield gets removed when installing a catalytic converter anti theft shield. There must be a lot of them around. Mine is in the back of...
I ordered some M5 0.8 x 16mm stainless cap screws to replace the Philips screws. Hard to get in at a straight angle on one of the screws, worried...
Mendel, will the wheelwell access described above allow better access for removing and installing a new cooling pump? Posted via the PriusChat...
No rattles, but I did pull down on the back middle of the shield real hard after mounting it to get a bit more clearance. I heard of bending over...
I got the Cap City Muffler (CCM) shield off of Amazon for $160. There are nockoffs on ebay that looks pretty much identical for a little over...
The cool thing about the aluminum filter housing he is considering above, is that you can thread it in all the way, then it just stops, won't go...
I'd like to know this as well, I just cleaned a spare EGR valve and took it apart while cleaning it up. It seems that you have to screw it down to...
Is that all that will come out? I never tried it before, but I always thought all the oil would come gushing out. [emoji3526] Posted via the...
