Separate names with a comma.
For $4 more, get the OEM set, but the one I got off eBay looked OEM to me. As for the oil, you can probably catch and reuse it, but you still had...
Cant you just clean off the carbon buildup on the stem of the EGR valve? A YouTube video posted uses PB blaster penetrating oil as lubricant for...
LMK if there are enough threads on the front studs with a 5mm spacer. I'm mounting wheels and tires this Friday on our 2011. I purchased 5mm...
I do the same thing with dealer service departments. I give them 4 quarts of oil for the Prius, and 5 quarts for the Camry (3.5L V6) and tell...
When you had your manifold off for cleaning, did you replace the PCV valve? A malfunctioning PCV valve could be the cause of the rough running at...
Something like these? They're probably about double the width of the actual strap, if memory serves, but maybe you can squeeze it in? It would be...
I once changed the oil on a 2000 Camry and didn't notice that the old o-ring from the spin on filter stayed on the engine side of the mount when I...
Any Check Engine light error lights on the dashboard? If yes, then you should get your codes read. .
We are at 124k on the odometer, cleaned the intake manifold, changed PCV valve, cleaned EGR pipe. EGR cooler will be swapped for one currently...
How many miles are on the odometer? Did you change your PCV valve when you cleaned your intake manifold? .
Here's a picture of an oil catch can fitting that threaded right into the original PCV valve location. The PCV valve was installed in a vertical...
Yes, the spare EGR cooler is filled and soaking with straight dual hydroxide drain cleaner (lye). Been like that for a days now, and still getting...
Hmm, no leaf blower, maybe I'll connect my vacuum hose to the outlet port on my shop vac and blow air through that way. It'll be slightly warmed...
Finally got to removing and cleaning the intake manifold and installing an oil catch can yesterday. Mileage on our Prius is at 124k miles. I also...
I'd take the car back to the PDR shop and tell them to put them back. No charge, of course. .
Rocks have been known to ding the radiator and the inverter radiator causing coolant leaks. That is why I put aluminum mesh behind the lower and...
Do you know the size of the o-rings you used? For now, I just put thread seal on the dipstick threads. .
Are you sure all of your connections are leak free? Hose connections tight? I am assembling all fittings, especially the ones at the catch can,...
The stainless steel 1/2 inch NPT 90 degree to 3/8 inch (10mm) barb fittings came in today. Pictured one fitting into the 3/4 inch ID hose needed...
That's the one off eBay with unknown miles on it. I still haven't tackled the one on the car. I'll take a picture of it when I get it off. My...
