Separate names with a comma.
Highly doubtful, physically, they are very different looking. .
Yes, as a 2011 Gen 3 hatchback owner who is currently cleaning an EGR cooler sourced off of eBay, with unknown number of miles, but totally...
That might work, but would still require physically removing the catch can and joining the inlet and outlet hoses to one another. Posted via the...
It probably depends on the individual inspector. My HID bulbs are 4300K, so when warmed up (~30 sec) they are white, but when first turned on,...
Due to our annual mandated "safety" inspections, I have to remove the HID bulbs and install halogen bulbs in both Toyotas prior to inspection...
Lol, yeah placemats and all. [emoji16] .
Though we go through our share of canned corn, I had some 1/2 inch stainless steel mesh left over. It will be attached to the crossmember with...
Yes, Persona is 5x100 bolt pattern. .
Still haven't got a chance to do the EGR cooler swap and oil catch can install. Ordered these cool stainless steel fittings to go between the...
"Physical terrorist"? Is that autofill, or intentional? I've never seen anyone refer to a physical therapist as a terrorist. [emoji6] Posted...
I've got Oxy-Clean powder too, but I only did a couple soaks with it, and only left it in about 5 minutes. I guess I didn't remember that it would...
If that's the case, then a good lye based drain cleaner should work well too. So far, I've been trying to avoid the caustic cleaners. But if the...
I decided to hit the EGR Cooler with undiluted Simple Green Pro HD cleaner. My previous mistake was diluting it with water, probably 1:10 to 1:5...
Can you provide a link? I was looking at hose attachments on Lowe's and HD websites and saw several. Does it really blast out all the crusty...
I bought one off of eBay for $130 shipped. But it was dirty as, well you know... I wish I had a pressure washer, so far I've tried many different...
I think Mendel Leisk mounted his on the crossmember as well. Definitely out of sight down there. But don't you have to remove the big undercover...
Has anyone installed the catch can(s) near the passenger side firewall? I know most people install it between the fuse box and the driver's side...
I finally installed the aluminum filter housing I linked above on the Prius today. The Toyota mechanics who have been servicing the car...
You'll need to use a primer that adheres to plastic, or the paint will not work. .
In addition, I'd probably use a small "patch" of drywall repair tape that consists of fiberglass mesh. First lay down the silicone, lay the mesh...
