Separate names with a comma.
I have an almost-new front apron (front most black plastic underneath.) Already, it is showing signs of stress and wear. The plastic corners...
I just discovered I have an issue with some missing bits at the rear end of my 2011 Gen 3 passenger body side moulding. I'm sure I can repair the...
Gen 3 Prius, across the top of the front bumper cover where the hood drops down... there's a long cushioning strip. In replacing my bumper cover,...
Auugh. I have the "PriusChat" Euromud guards on my 2011. Except, the right-rear mud guard fell off sometime during a recent trip Does anyone...
A 2023 report on 3m film, applied to a 2011 Prius right after purchase (late 2010)... and replacement clear bra on the front bumper cover about 7...
I spent a few round-toit's digging into the details on the J2534 bus, its specs, and the free Bus Analysis Tool. Here's what I learned. (NOTE:...
I need to temporarily remove the plastic holder for the gas cap release lever (on the floor next to driver)... due to vomit getting under there :(...
Had a wonderful trip to Buena Park, CA to visit Hybrid Pit Stop... who swapped out our 218k mile 2011 engine for their "gold" comprehensive...
Context ASAP, but for now... I likely need to remove/replace my oil pan. What size are the pan bolts? I found cheap plastic "pop ups" that make...
I am taking care of refitting the lower front splash shield (p/n 52618) on my 2011. Every diagram shows two outer front screws that go into a...
I bought an "OEM Koyo" front Hub/Bearing on eBay. Had a gut sense to check carefully... and noticed a few things: Packaging appears to be...
Slid on black ice and whacked a curb bad enough to blow the R Front tire and bend the wheel. Have replaced lots of parts... Visible symptom: the...
Trying to get to my existing threads. Everything I do results in a server error. Others having issues? For a bit of Prius content: with the help...
Our adventures continue Gen3 Prius, over 2k miles into a 3.2k trip, out in the middle of rural Idaho. * Repaired HV battery is working great *...
In early June, I visited a stocking JDM motor source in Texas, hoping to find a Gen3 engine from 2015 that could be swapped in to replace my...
I plan to try a good long piston soak after our current trip. What's a good vac product for pulling the soak liquid? (No, I don't relish...
See below for my URGENT question. We are 1400 miles into our travel adventure with newly cleaned ip Gen3. New plugs, clean IM, clean EGR, cooler,...
I'll begin by adding my HUGE thanks to everyone who helped create the NutzAboutBolts videos. They are very VERY helpful! As an experienced test...
Here is a video on EGR issues, with some interesting insights. I've not found significant discussion of these things in PriusChat and wonder what...
So my 2011 Gen 3 has been eating oil since ~120k miles. More in the summer (almost a quart per fillup.) And now I've got the occasional...
