Separate names with a comma.
First, I looked at the original BT Tech and all designs that followed. All they did was to make a thicker and heaver version of the OEM brace. I...
First, I looked at the original BT Tech and all designas that followed. All they dis was to make a thicker and heaver version of the OEM brace....
After 2 months of working with the Tanabe "Sustec" TUB153F with my Prius"v," which I discovered, has the same chassis, basically as the Generation...
For those, who are interested, I am posting a picture of three variations of my Prius "v" and Gen III mid-chassis box beam chassis stiffening...
For years, I have struggled with the yellow and green "zinc chromate" primers that the Ford Motor Comany developed for painting aluminum aircraft...
This bar would fit all Generation III'sThAnyone interested in a custom "improved" and less expensive version of the Tanabe TUB153F two point from...
In the Prius v Accessories and Modifications Forum, I posted a thread on the Tanabe "Sustec: TUB153F two point front under chassis bar on Monday....
It was easy. It was 90 degrees outside, yesterday, And, it gets clear reception. It sure looks better than the "rubber duckie."
After extensive research, I took a chance add purchased the Tanabe "Sustec" TUB153F front chassis two point chassis stiffening bar from Amazon.com...
My study of Prius frame reinforcing goes on. Quietly Toyota upgraded the earlier "L" shaped Generation III Prius with a "triangular" front...
I've been working on offering Priuschat users, Gen III and "v" custom box beam center braces for a little above cost. Here's some of the...
I designed this mid-chassis brace for my Prius "v," but I have since discovered that the Generation III Prius uses the same center brace. The...
The Cusco mid-chassis stiffening brace, with the two beams that go to the back brackets that hold the two parking brake cables, and selling for...
I purchased this nice set of center caps for my Prius"v" and relized, before they were delivered that they were not the right size. These are...
In an earlier post, I indicated that an easy way to correctly tighten the oil filter cap wrench is to mark it's position in relation with the...
I took everything out of the bottom of the cargo area and checked the pressure in the spare, today. It was no easy task. The tow foam carriers...
http://www.amazon.com/Lisle-54930-Flute-End-Cap/dp/B003V5HR52/ref=cm_cmu_up_thanks_hdr It fits "perfectly," and that's my image loaded on...
Anyone else see the poor ratings on the Toyota Yaris on page 57 in the May 2012 Consumer Reports? Since the Prius C is based on the Yaris...
The myth about premum is that, because it costs more, it is better. Unless you need the "octane" rating for the particular vehicle to prevent...
