Separate names with a comma.
Not very, they don't have any cutoff, so they glare into oncoming driver's eyes and anyone driving in front of you.
Well, then a smaller gauge wire (thicker) should be used. But 10 amps is a lot of current for a light.
I'd tend to agree with this. Some stores that sell batteries will perform a battery check, including a load test, free of charge.
Generally, it's not a good idea to put a higher amperage fuse in place of a lower one that keeps blowing. The fuse is meant to fail before any...
Do that, and you risk blinding oncoming drivers (glare) from headlights that are shining too high, or poor down the road lighting if your lights...
Your cutoff should look something like this: [ATTACH]
In the user manual there's a procedure to lower/raise the level of the lowbeam headlight on both sides. You can Google search how to check the...
Please provide more information: year of car, miles on odometer, original traction battery?, original 12v auxiliary battery?
After replacing the headlight assembly, make sure to check/adjust the headlight aim. The impact that caused the damage and the fact that it's a...
Cellphone in same pocket as key fob? Get the fob as close as possible to the door, so if the fob is in the opposite pocket from your hand that's...
Yes, the board tucks right in under the cover.
This has happened before when liquid has been sprayed on the screen and gets into the electronics.
I put this type of 12 LED lights in our hatch light fixture. I prefer the warm white color, they also sell the cool white ones as well: 2 x Light...
Yes, please keep up with traffic. A lot of bad driving behavior towards the Prius is due to other driver's past experiences and perceptions of...
If it's 14.x volts, then your high voltage traction battery and DC to DC inverter is online. A healthy 12v battery should read above 12.7v or so.
Should be very similar to the Gen 3: DIY: How to black-out the headlights on a 2010+ Prius | Balancing Act
In this picture (posted in another thread), you can see two plugs further up from the strut mounting point, towards the spoiler. You would take...
It should work, but you have to take extra precautions when working on the 12v battery connections because they'll be live/hot. Wrap the terminals...
Check the date manufactured label on your 12v battery. If it's the original battery, it's time to look for a new one. We've replaced the battery...
Most trickle chargers don't have enough amps to charge a dead battery. They're meant to top up batteries, not save them from a very low charge state.
