Separate names with a comma.
Level read on a cold system should be be no more than Full. My guess is the B level allows for thermal expansion of the coolant when the vehicle...
How often do you use your highbeams? Mine function 99% of the time as DRLs, not as highbeams. Same as foglights, rather than trying to match the...
Beach car? :) Hopefully, the car wasn't under water. :(
I installed an aluminum and carbon fiber 5 inch screw on antenna purchased on ebay. Works fine, and it costs less than $10.
Be prepared for an uninformed dealer service advisor quoting you a very high drain and flush transmission service price based on a regular...
Just to point out that the fluid gets dark pretty quickly on the original fluid. The OP changed it above 150K miles, so it's no surprise that it...
I believe the "recommendation" on this site is 30K, and 60K intervals thereafter. I changed mine at 35K, so I'm changing it again at 100K.
Hope your transaxle lasts. Here's what my fluid looked like after only 35K: [IMG] New fluid on the left.
Well, theoretically, the one with the prongs would be less likely to damage the cartridge housing and able to transfer more torque.
Shouldn't matter, we're talking about 0.5 mm after all.
Type B would be best, IF the slots align with the raised ribs on the cartridge housing. I'd avoid anything made out of plastic or polymer....
The outlet is not powered when car is shutdown, so it should be OK.
Regarding hitting parking stops... If you back into the parking stall, you won't scrape your front end on the parking stops. ;)
You might need to check your ground connections. Make sure everything is good and tight.
+1. Disconnect the battery first, that will stop the constant beeping.
Repairing the ring by grinding the broken surfaces and using epoxy to join the ring might be possible. Fast set, 2-part epoxy adhesives are...
Grabber tool costs a few bucks, available at auto parts or hardware stores: [MEDIA]
You're not the first person to have this happen, and you'll likely not be the last. ;) People have had some success using a coat hanger wire...
Interesting, my 2011 has a plastic mounting surface.
OK, but it would look better, IMO, on a gen 3.
