Separate names with a comma.
Nope, the lens itself is clear on the PIP tail lights, no red insert to remove on the regular Prius tail lights. Have your neighbor, or your...
Usually, you press and hold down the preset button till it beeps a confirmation tone. It works regardless if something is programmed already on...
Wow, IMO, 55w HIDs in foglights is overkill.
OP, link to an H9 mod thread in a link in my signature below. Look for the video at the end of the thread by mediahound.
NVM, post deleted.
Maybe coolant and transaxle fluid mix? I'd check the inverter coolant, and if it looks like anything is mixed in there, I'd also dump the...
Sounds like you have dirty or corroded electrical contacts/terminals in your bulb socket(s). Adjusting the wiring causes contact, then later the...
I'd be surprised if they come with the switch and harness installed. The gen 3/3.5 don't.
Did you try taking down just one tab on each pair first?
Those LED bulbs wouldn't put out much light. You'd be better off putting in yellow 9006 halogen bulbs.
Wow, that's pretty bad. Supposedly, those headlight covers are replaceable. Finding the parts might be a challenge though.
The only times headlamp housings melt typically, is when the halogen bulbs aren't mounted properly, at an angle. This results in excessive heat...
I've never heard of this happening before, especially with standard headlights/bulbs. The car must've not only had the lights on, but left running...
The OP did take it to the dealer, but felt he got scammed because he didn't see any signs that the wheels where taken off.
Why take the wheels off if the bleed screws can be accessed from the inside while the car is on the lift? Also, tubing can be placed over the...
The 2nd reviewer of the linked hitch above is a Priuschat member with a very interesting Prius v. ;) The Hybrid Convertible Project Prius v |...
Here's a class 2 hitch rated for 350 lbs tongue weight: Torklift Central | 2012-2016 Toyota Prius V EcoHitch
Yes, and yes.
Try testing the bulb contacts for continuity/impedance, or use your multimeter leads (disconnected from meter) as test leads from the battery to...
Yes, but disconnect the 12v auxiliary battery negative/ground terminal first. Wait about 20 minutes to be sure that all capacitors are completely...
