Separate names with a comma.
If it's a private message, or start a conversation, which is what it sounds like, then others will not see it to interact. Which is why maybe it...
Up to 10, doesn't equal minimum 10.
As long as you get power from a reliable source, like the fuse box, and not the oem headlight circuit, then capacitors are not necessary. The...
Click on OP's avatar and select "start a conversation".
Take the 3 hubcaps off and get some center caps to cover the hub openings. The factory silver painted alloys look pretty decent IMO.
+1. I agree, it sounds like the OP is activating the Hill Start Assist feature. OP, if it's the Hill Start Assist feature, then simply pressing...
Hopefully, they didn't botch it. Several threads in the past regarding cross polarity jump start attempts frying the inverter. Hopefully not...
The search feature on the site is pretty much useless. Use Google search with priuschat.com as one of the search parameters.
Yes, you have to reverse polarity to the ballasts in the Prius installation. I released the pins in the connector shell with a small screwdriver...
Still sounds like the 12v battery is weak/bad. Get a volt meter or multimeter and measure the battery voltage when the car is off. The buzzing...
There's been a rash of this happening lately: Oops....... who left the hatch open? | PriusChat HELP! Broke Spoiler on back of 2015 Prius,...
Posted response and picture in the other thread you asked in: OPT7 55w HID kit - Prius 2014 package 3 | PriusChat
I have the OPT 7 Bolt 35w AC HID kit in my Camry. It is working fine with a self made dual relay wiring harness connected directly to the positive...
Ignore the error. If you don't get any more errors with subsequent starts, don't worry about it.
Yes, hyper flashing will occur. You can change the flasher relay within the dash to an LED compatible one. That is a better solution than to use...
Costco all weather rubber mats. They come in gray or brown.
Regarding the event data recorder, the OP should not have driven the car after the impact. IIRC, the EDR only records the last few minutes, then...
They had to "diagnose" the noise it was brought in for.
Inverter software update.
OP's problem comes and goes, so it's not blowing bulbs. It's most likely the relay, switch contacts, or corrosion on the connectors.
