Separate names with a comma.
I made my own dual relay harness, using 12 gauge wire from the battery to the relays, and 14 gauge wire from the relays to the ballasts and ground...
Can't tell much without knowing what DTC codes were generated/logged.
Brake switch/sensor going bad?
If your car is still on the original 12v auxiliary battery, it's probably time for a new one. A low 12v can cause various types of warning lights...
This looks like a good, washable, oil free air filter with a lifetime warranty: [MEDIA]
Using a relay harness with a thicker gauge wire to transfer more power to the HID ballasts. The oem stock wiring isn't very thick, so using a...
They're license plate lights, how bright do they have to be? :confused:
What do you have against people named Joe? Traumatic experience in the past? :confused: :D
I'm happy with the H9 bulb upgrade (link in my signature below) on our Prius. Minimal modification needed to the H9 bulbs for 150% more light, at...
There is no horizontal axis adjustment. However, you should check that the bulbs are installed correctly in the headlight housing. With the...
Glad everything is sorted out. FYI, when replacing bulbs, it's always best to replace them in pairs, not individually, because the bulbs get...
I think you are confused. The square reflector lights on the inside with the 9005 halogen bulbs are the highbeams, not the lowbeams. The lowbeams...
The bulbs should be H11, why do you have 9005 in parentheses? 9005 are the highbeam bulbs. There are two fuses for the lowbeam headlight bulbs,...
The rear is much lighter than the front end. It makes sense to have a lower pressure in back.
Check with your local Costco, mine won't mount anything other than the factory specified tire size on the vehicle. Must be a CYA/liability thing.
Your pic isn't showing up for me on either my smartphone (Tap a Talk) or PC (Chrome). Keep the wiring away from heat sources like the radiator or...
You have LEDs. You must have a Five.
The metal ones I've had were aluminum, so no worries about rust.
The valve caps have nothing to do with the TPMS warning system. If your original caps were metal and now they are plastic, that's a downgrade. But...
