Separate names with a comma.
Because you were using a canbus relay or wiring harness, not the dual relay HID harness. There is a difference.
As long as car in Ready mode, doesn't matter if engine is running or not. The auxiliary battery voltage is only 12.x volts, versus 14.4v or so...
I tried Silverstars, overpriced and not much improvement over regular halogen clear capsule H11 bulbs. H9 bulb upgrade is brighter, and cheaper...
There is no warning chime or beep because the lights will automatically turn off after a set time (selectable, see owner's manual). FYI, this...
It may look like there are 5 LEDs, but the 5th one is purely cosmetic. ;)
They're usually available on ebay as well.
Where did you end up connecting your fused power lead?
Are you still on your original 12v auxiliary battery? If so, it's about that time to get a new one. That's probably your problem, lots of random...
Your odometer will register falsely higher with the smaller tires as well...
There are numerous tire size calculators, according to the one on http://www.discounttire.com/dtcs/infotiremath.do your speedometer will be off by...
Google Karr alarm, look at the images tab. ;)
Post #4 above, option #2.
The marks on the assemblies aren't for indication of tampering. They're there to indicate that the bolt/nut has been torqued to factory...
Yes, definitely.
I don't understand why TRS is recommending the canbus relay. This is at least the second thread where it was mentioned that TRS sold a canbus...
I use my highbeams, some think that looks old fashioned. :rolleyes: I just want to be seen. ;)
Yes, you want the higher mounted, wider angle lights for DRL function. The whole point is to be seen. No, that's why they are run at half power....
You still haven't answered my question about rechecking the ground connection(s). Galaxy Nexus ?
Did you check your ground points? It sounds like you don't have a good connection, especially if it fails to reliably ignite. FYI, it's bad to...
Check out this YouTube video, this guy did what I did, made his highbeams reduced power DRLs, using some relays: [MEDIA] I think you can just...
