Separate names with a comma.
In the event of airbag deployment, those little bits of "magical" CF could become sharp, and deadly, projectiles. With all of the Takata airbag...
In the OP, under materials, it lists latex gloves... none of the subsequent pictures show latex gloves... am I missing something? ;) ;) :D Sorry,...
I put a link in the post above, search for B00480KOP4 on Amazon. It will bring up the correct bulb.
Sorry, I didn't notice that one of the pictured lugnuts was an FRS OEM lugnut. If you have the FRS OEM lugnuts, use those, as they would be...
Buy the Philips bulbs from Amazon: [MEDIA] they are German made and are highly reviewed by people who are doing the conversion from H11. Even...
Osram H9 clear bulbs from Germany are what I use. 15 months now and still burning bright on my Camry. One bulb burned out at 14 months on the...
It's a ratcheting mechanism, it would be highly unlikely to be losing it's height adjustment on its own. :confused: You must be shrinking...
This one has better reviews: [MEDIA] And I'd still use the rubber cement with it. It will make inserting the plug easier, and it will make a...
Plug and patch from the inside is the industry standard.
Of the 3 types of lugnuts pictured above, only the oem mag type lugnut on the left is the correct type for the flat machined surface of the...
Look at the wheels. If the hole has a flat surface adjacent to the holes, then you need a mag type lugnut, like the stock ones. If it has a...
Make sure you match the lug to the surface of the wheel, it has to be the correct type. If the surface is flat, the acorn type lug nuts is not...
Just have to drop the corner access panel under the foglight, there's 3 fasteners to undo. The bulb is a standard H11 55w halogen bulb. Turn 1/4...
That's all true, but the OP didn't even own the pair used in the first post.
As mentioned above, the Prius doesn't have an amperage sucking starter motor, so even very thin jumper cables with small clamps would work. Buy...
If they were made by Takata, then maybe it was a good thing they didn't go off. :o
If the tab is cracked off in a clean break, clean it off with some alcohol, let it dry, then repair it with some super glue. Then reinforce the...
You wouldn't believe the stuff I've repaired using two part epoxy adhesive, like this stuff: Amazon.com: J-B Weld 8267-S SteelStik Steel...
The foglights are the same. It wouldn't make sense for Toyota to make different foglights for each car they made. From what I read in your...
You can try swapping the bulbs around to the other side to see if it's the bulb. If it's the bulb, you'll have to contact the seller to get them...
