Separate names with a comma.
Yes, but allow some time for the components to "settle in" before getting it aligned.
Wait, so the pick up truck rammed into your wife's Prius, causing her to hit the car in front of her, then drove away? :confused:
If it was the inverter there'd be a lot of codes.
What I don't care for on the rear jacking point is that it is off-centered, the rear end lifts at an angle. You have to place a jackstand under...
How did you "check" the fuses? Visually, or with a meter for continuity?
I find this hard to believe.
Maybe a BB, pellet, or ball/rock from a slingshot? If velocity was low, it could've shattered the glass, but bounced back and not end up inside...
No you're not the first, and last Prius driver to experience this and feel this way. man, they love to tailgate a prius | PriusChat
It's in your owner's manual. At the back of the engine bay fuse box, covered with a red plastic cover is the positive terminal jump point....
Done what? Coming apart, or going together? Hard to tell. ;)
Turning the steering wheel with the ignition off will definitely engage the steering wheel locking mechanism. However, if the wheel lock is...
Well, the battery is back there, that should be a good source for constant +12v. ;) Not sure if any switched power sources are back there,...
In a high mileage Prius, the Atkinson cycle engine apparently gets pretty fouled up in the EGR system as well: Prius III engine knocking at high...
You might try contacting Priuschat member sfv41901, he successfully transplanted Lexus CT200h seats into the Gen3. He'll probably be able to give...
Do you use top tier gas with detergent? If not, your injectors may be dirty or clogged, causing some misfires and vibration. You can use...
How will wiggling the spare tire help? :confused: :D Yes, maybe the steering wheel lock is engaged. While turning the key, try moving the...
Here's some of the threads on the subject: Advice on Timing Chain Cover leak | PriusChat Timing cover oil leak | PriusChat The second thread is...
Oh, I see, the oil drain plug washer is $0.95
$3.95 for one oil pan drain bolt washer? :o
Wow, with all that metal cutting, maybe a plasma cutter would've been a worthwhile investment? (y)
