Separate names with a comma.
Any audio/alarm shop should be able to install it. SCH-I535
Ok, sticking to the thread... Sylvania Silverstar zXe H11 bulbs are pretty good, but shop around for the best price. SCH-I535
I have these installed, they're pretty good. And no modifications necessary. ;) SCH-I535
No issues, just noted that the H11 bulbs were brighter and the wire gauge looked thicker in the Prius than the Camry. The H9 upgrade has...
If you lived close to me, I'd do the conversion in front of you in about 5 minutes, both bulbs. Installing them afterwards, now that's the PITA...
This is a list of your mods in your signature: "TRD Prius Plus: 17" wheels, Toyo Proxes 4 Plus tires, Lowering Springs, Rear Sway Bar" And you...
Seriously? It is taking you more time to post in this thread and create other threads in this forum than it would take to modify and install the...
+1 for H9 conversion. The premium H11 bulbs are overpriced, the H9 are around $8 each.
I have to disagree. Imagine the damage that would of been there if the molding wasn't there. Not purely cosmetic.
The directions on the OEM foglight thread says to tap the brown wire, I did and had no problems. But I don't have an aftermarket alarm system....
Aren't you supposed to tap the brown wire? SCH-I535
The generic relay will be many times cheaper than an oem rheostat/dimmer.
Even 1 engine failure for every 344 cars sounds high. And gasp, Toyota is double that, imagine 2 cars instead of 1.;) SCH-I535
Yes, but that is the difference, they come that way from the factory. Anything you apply to the headlight lens is a modification, even...
Here's a pic that shows the difference between the mounting tabs on the H9/H11 bulbs: [IMG] The tab on the H9 at the 12 o'clock position needs...
The OP sent me a PM. The OP was having problems in his circuit when the P button LED was dimmed at night, most likely due to reduced voltage from...
It's up to you, but it defeats the purpose of putting in a more expensive bulb just for looks (the tint). Something else to consider if you tint...
That's because they're probably using HID kits as well, which put out about 3 times the light of halogen bulbs.
The video didn't show the removal of a small portion of the largest of the 3 metal tabs at the base of the bulb. You need to remove about 1/8th...
It could work, as long as the connectors are truly compatible between the different arrangements of the tabs inside the various connectors....