Separate names with a comma.
Check all the bulbs to make sure they are seated properly.
There's a YouTube video of a guy restoring the cloudy lenses using extra whitening toothpaste, must be the extra bleaching agents lol. If you go...
Lol, then there is this alternative. Saw this on a Ford Fusion in a parking lot: [IMG] It's a pool noodle with a rope threaded through the...
They're available through most dealers and eBay as well. There is also a thread here on priuschat about RAV4 side mouldings fitting the Prius...
Yeah, tangents. I prefer arcs... and curves. :D
Don't you just love when the OP starts something like this and never returns? SCH-I535
The lugnuts will be fine for the 17s.
No, at top of IE Explorer window. Look for your menu bar with, File, Edit, View, etc. It may be at top left of window. Last option on menu bar on...
Click on Help in menu bar at top right. Then click on About. SCH-I535
Other than the mentioned speedometer error and rubbing issues, a larger diameter wheel/tire will place more mass further away from the center of...
The seatbelt warning beeping is a separate setting. SCH-I535
No. The factory connector goes to the short wire on the HID bulb, as labelled in your pic. The long connector goes to the ballast. And then the...
Ah, the narrow spaced pins are H11 and the wide spaced ones are 9005, like we have on the highbeam bulb. You might need to wire the HIDs without...
Sure, as long as you can fold down one side of the rear seat and lay the front passenger seat down so you can place the load diagonally across the...
Regarding aim. You want to use a flat, level area with a wall about 30 ft away. The cutoff line on the wall should be slightly below the height of...
At the back of the headlight housing there is a wheel with serrations on it, kind of looks like a small silver bottle cap. It also has a small, 8...
Regarding #4, no. The circumference of the tire should be about the same regardless of rim diameter. You WILL lose mpg going from 15 to 17 inch...
No problem. :) You got some soldering skilz? :D SCH-I535
Yes, you need to test the ground lead with a multimeter for resistance. A good ground should have a resistance of zero, or very very close to zero...
The parts list and build instructions are on post #6 in this thread. ;) SCH-I535
