Separate names with a comma.
You may or may not have lost fuel economy, but the more likely explanation is that because you have installed tires with the wrong height ratio,...
Of course, if you apply a load, you will see the values drop. I wouldn't call the drop from 14.1 to 13.6 a collapse.
There is no EGR system in any market on the Gen 2, so no need to worry about that.
Yes, on the Gen 2, there should be a belt. The engine will not survive for very long without it, so if the engine still runs, you must have just...
Rough ballpark - 13.6 indicates the battery is almost fully charged. 14.1 V indicates the battery is almost fully discharged. It doesn't need to...
You can't make any assumptions about battery block voltages until the ECU pins and voltage sense wire loom (aka No. 2 Frame Wire) is replaced.
You also need to share the short-term FT. The summed total of the LTFT and the STFT is what is significant.
One would think the counterfeiters would get that part right.
It would be interesting to note what the 12 V battery voltages were doing in real time as you attempted to do the linear offset relearning. Is...
That does not help very much. What is the actual code?
You likely don't need a new 12 V battery; just keep a charger that can supply 6 to 10 Amps on it while you do the various procedures. I skimmed...
READY should be 13.2 V to 14.4 V. 12.3 V in READY indicates the DC/DC converter is not charging the 12 V battery. BTW, the DTC U0293 means a...
I wasn't meaning to imply you were hiding anything, but it did feel like there was more to know. You provided more details in your next post....
The Master Warning Light comes on when there is a hybrid system problem. Oil, water temp, etc, will be signalled by the MIL (message information...
You don't say who replaced it, but if it were an OEM new fitted by Toyota, it should still be under a 3-Year warranty. If it were an OEM new part...
100%. You need to find a replacement.
Sounds like a might be a combination meter or 12 V continuity problem. The first thing I would be checking is that the 12 V battery terminals...
Besides reviving an old thread, the OP is talking about the front passenger door. There are no child locks on the front door. It might pay to...
Have you tried pressing the region one button width to the left of the far right side to see if the RH buttons have moved over to the left? Not...
I'll redirect your attention to what i said back in post #75:
