Separate names with a comma.
Anyone heard the "buzzing" sound that sounds like a hornet, wasp or bee is stuck under the dash on the drivers side documented in the video below?...
My guess, like the Phoebus cartel, there is collusion with the salt mines and related industries along with the big three to create such a...
I wound up investing in a low mileage (~67K) steering rack, from a local salvage yard, that came with both inner and outer tie rod assemblies....
Did you notice vibration or symptoms prior and if so, what?
Interesting and makes sense. Will try next when out. What are you thoughts regarding the glazing of the rotors? My thought was all day on the...
I recall a Car Care Nut video or two where he swears you don't need to replace your CV Axles if the boot alone tears and grease is lost unless...
This actually worked for about two days. Rained, so unsure if related or not. Thinking I'll disassemble and inspect to see what pads were used....
Wondering what the resistance of the good hatch latch lock release actuator part is? Thinking might not be a bad idea to test at the yard,...
If you've gotten the bolts unscrewed and are struggling to pull all the way out; a little Harbor Freight pry bar like shown in thumbnail for the...
Look like the what I thought were "ADVICE" are "ADVICS" and I'm not certain yet if actual equivalent Toyota part, though I guess good to know and...
Here's the aftermath for those that want to see some video regarding in the future. Nothing special and only if you have the time, plus there is...
Here's a link to a video for the gen 2 2004-2009 Prius. The above quoted link is for the gen 3 shock replacement.
I've cut two pairs of gen 3 rear axle spring bottom plates for a mainly Prius or Toyota material lift kit to bolt in under the spring. Was just...
Keep us posted. I have 2" plastic spacers I found all around appears. Those have to go since seem wonky and cheap. There are RubberShocks as...
Gaining more interchange info for the general masses who own Prius. Pros and cons ideally for parts that fit, though may or may not be slightly...
Update regarding observations: Are These Lower Control Arm Bushings and Control Arm Interchange Correct? | PriusChat
Got it! Used the method shown in this video, "How to remove seized rusted stuck lower control arm bolts Part 2" by YT channel DOSE OF FREEDOM,...
I found the 2009 Corolla Sway Bar linkage to be ~1/8-1/4" longer. I'll try to measure later and report. Appears the ball joints do interchange...
You read my mind thinking Gasket Masters demonstrated, though didn't recall which video(s) he shows in. Thanks Mendel. Totally motivation for...
Good to know the range of detailed ways to remove these stubborn bolts for my 2013 and the experience I fear I'm about to have with the 2006....
