Separate names with a comma.
You guys on this forum are fantastic!.. wife totaled the 2011(Prius airbags are REALLY good, she only got a bad scratch on the arm ) and I got a...
History Ok... have rebuilt the main traction batt many times and the last repair was just a couple modules, the computer got and stayed quite...
Have had a Gen 1 for about 2 and a half years...rebuilt battery several times, replaced ABS pump etc ...all with my trusty mini VCI and old win...
Hi all...and especially Bob :)... Yes, the 'method' of rehydration ...and the method I used to seal the cells works well and is very easy to...
I found later I really didnt need to use the heat gun to preheat the case.... it you use a blunt and cleaned soldering iron tip with a high enough...
Update.. 4-4-18 My mother in law (83) passed peacefully a couple months ago and is now in a much better place. With intense care and then...
I have replaced the 12v battery with a small lawn mower battery (there are only 2 due to one config is pos on left...other is pos on right) Cost...
Update... After an extremely busy summer and the last battery build hanging in there til recently, I have great hopes of getting to do some...
Just a note... this happened to mine once as well... and since I had used the lawnmower battery trick ...I just went to Walmart and bought another...
Maybe should have titled this Gen 1 Module tolerance... Ok... seems to be most relevant thread so here goes.. Gen 1 ...rebuilt pack about a year...
Now the rest of the story.... well, at least a part of it.. I found the way to 'zero down' the brakes, did that, and checked the fluid. It was at...
Thanks Chap I will certainly take advantage of the info... After attempting to reset...and remove the codes two days ago... the very next day...
One more mention...unrelated... at some point in the upcoming spring I need to find out how to add freon (procedure) as the ICE will sit and...
Hi Chap... No Zero down.......but as stated ...was barely at the low mark when checked...and I added just enough to bring it to almost 1/2...
Ok...heres the codes...and a note C1202 Brake fluid level low...open circuit in brake fluid level warning switch circuit C1251 Pump motor is...
Sorry for the 'mumbling over codes'... but I cound;t remember the codes...nor had the time in the busy schedule to find it... I have a day off...
Hi Bob...or anyone that has had experience with this sorta common problem gittarpikk in Maryville here....been a while since I posted...but...
Hi Bob gittarpikk from maryville tn can I get your email to send you a question... only get 420 characters get in this post... not enough...
sorry... know this is an old post Does this #13 and #4 clip trick work on Gen 1 (2002) I have a mini VCI... which way is better to clear the...
