Separate names with a comma.
Remove fuse. Use test light from battery NEG (with car on) to figure out which side of the now empty fuse socket is the voltage source (light will...
If there is a short to ground it will be intermittent so in order to find it with continuity testing on a meter you would have to keep an eye on...
Those are all the things the EFI2 fuse goes to (EGR, A/F and O2 and MAF) so those codes are probably the result of the fuse blowing. The more...
double post
I know people don't believe this and I'm sure it doesn't work in 100% of cases, but a quick B12 piston soak has essentially solved my oil burning...
The EGR cooler would be getting the same effect as the cat from any "cat clean" chemicals present in the exhaust gasses, no? I'm not saying it...
This. It's an OK deal if you DIY, it's a potential nightmare if you don't. The fact that the dealer wants $2,500 for what amounts to $100 and a...
Try to see what happens to the fuel trims in various driving situations. A graph with long term and short term fuel trims plus engine RPM might...
Yeah probably, post pics. I guess it depends which parts you lost. Can you test it with just the naked board?
I tried a rebuild kit when I couldn't find a caliper locally (the aftermarket rebuilt one on my car was leaking from the parking brake mechanism...
Consider purchasing an OEM caliper from an online Toyota dealer. You can get just the caliper part minus the bracket for under $120 and use your...
Yes, the HV battery turns the crank until the engine "catches" and if it never does it can last around 10-20 seconds before it dies. Each try will...
I would check the fuel trims next.
Jack up the rear and make sure the wheels spin OK. The rear calipers in these cars are known to have issues.
First thing I would do is jack up the rear (there's a convenient rear-center jack point) so the tires were off the ground and test for wheel drag....
The motor assembly I'm talking about is in the front passenger (RH) door. You have to remove the interior door panel to get to it. There's a...
I'd unplug N2, which is the front RH motor assembly connector and (after visual inspection) check resistance from pin 1 to ground, and from pin 9...
From what I can tell the LIN wire from the master switch assembly is what tells the other window motors what to do. Since the other windows all...
OK, good luck with it.
It's not just the EGR valve that needs to be cleaned it's the whole system, but to me it seems more likely to be related to using head gasket...
