Separate names with a comma.
I just removed the spark plug and sprayed carb cleaner in the tube, I’ll wire brush the thread tomorrow and do a good clean up. I’m gonna send the...
:ROFLMAO: :ROFLMAO: Never happened to me before, the only reason it happened is because of the cylinder 1 misfire and it’s causing the oil to...
well, that gives me hope to not bring it to a machine shop if my cylinder head and block is straight and not warped. Maybe I’ll check the valves...
Did you have your cylinder head valves lap and stem oil seal replaced? Or you just replaced the headgasket and put everything back?
Your latch looks secured and on properly, I wonder if it’s the big plug that you removed from the inverter that isn’t plugged in properly for the...
nice, mines a 2012 too. Got plenty more to go, cylinder one spark plugs was tough to remove, I thought it was strip, used an impact wrench to...
well, you got plenty of time for the headgasket to go bad
For those that don’t have the magnetic socket. Just use a regular 14mm socket for the spark plug, then use a magnetic pick up tool to take the...
Have you checked all the sensors that was disconnected in the HG process? Crank position sensor? Cam sensor? I’m curious at what is the issue…
yes, almost hitting 300k, hopefully once this HG is fixed, it’ll go to 300k :ROFLMAO::ROFLMAO:
yeah I saw that tool… people complain the magnet is too strong lol… I think I’ll do that next time when this is a project car. As for how, I’m...
mines at 284k miles… wish I had that easy valve compressor tool that Toyota has, would definitely make it easier to do it at home lol.
lol I think it’s only a pain in the butt since I’m filming it too, taking longer than expected. I wouldn’t mind doing it again in the future, but...
yeah I didn’t remove any AC component. The only one I need to remove is the AC line bracket that’s near the coolant reservoir to get access to the...
which AC line? are you referring to the thermostat housing?
yeah, I think they know how to resurface if it doesn’t need it. I’ll probably ask them to clean the mating surface so it’ll bite the headgasket...
yeah, I just asked to get it resurface and check for leaks. Hopefully it’s not more if I asked for other services :ROFLMAO:
Almost there, EGR was a PITA as always :ROFLMAO:. intake manifold looks dirty and gummy by the pvc area. still got a bunch of bolts and...
I just watched a video on how they lap the valves and cleaned it up… I don’t think I got enough time for all of that, I think I’m just gonna send...
any valve stem tool you recommend? I bought my kit from the dealership, costed 302$ and came with a bunch of gaskets, including the stem seals
