Separate names with a comma.
FIIK; probably mid 2000's. bought it on ebay 7 years ago...
short answer is contact Crutchfield. they will throw in installation instructions and wiring with your system and tell you exactly what to buy...
keep your old links of they're not worn. if they are get prius links.
pressurizing the tank might help; or it could lead to a > $1000 repair bill. someone needs to travel to japan and slap the ____ out of the...
yeah, maybe he does a lot of in town short trips. I have gotten about the same mileage from all 3 of mine; I believe any of them should get close...
put 40 psi in your tires (what kind of tires you have, are they LRR?) check your 12v battery condition, clean out your HV battery fan, try to...
if the aluminum isn't really thick, it shouldn't be that difficult. if I was wanting to make a skid plate, I'd use the oe plastic panels as a...
sort of like self proclaimed "stable geniuses" ... Donald E Coyote "Super" Genius!
just get a new or used hood. anything else is a waste of time and/or money. ebay has both aluminum and steel primed hoods. get it painted at...
making the speedo inaccurate by design is a stupid idea, but not as stupid as that damn bladder in the fuel tank. I wish I could get a European tank.
see if 205 50r16 is available. better traction, negligible mpg hit. they should improve speedo accuracy and look better too.
you should borrow a bore scope and stick it in the oil drain plug hole, as well as check the cylinder walls for wear. if it's as gunked as you...
you will need new frame bushings for the front bar because it is a different diameter than the stock bar. it is critical that you re-install the...
sway bar end links. since the boot is torn, you should replace them, but its not urgent. they will wear out and rattle over bumps eventually, but...
lookin sharp
this Is the gen 2 forum. you should ask in the gen 3 forum. might be too tall, but width should be ok.
CL guy is color-blind...
that plate stops at the subframe. the cat is mostly behind the subframe.
if I was gonna do a skid plate, I'd use aluminum sheet (maybe steal a large road sign?) and just use the plastic panels as a template so that it...
as above '03-'08 will fit, possibly a few years later too. I think any corolla /matrix with the solid rear axle will work. trd and progress rear...
