Separate names with a comma.
I will ask one of my testers in Sweden to try Hybrid Assistant and find out the difference.
GS is using the same blade so yes, also the Camry hybrid 34 will be supported.
I believe Gen1 battery is in slight different form, I need to find a donor car in Los Angeles area to measure them up.
yup, still tweaking the final 3D design, ex: the temperature sensor holder at the bottom of the case need to be tighter by 1.5mm I am printing a...
ok, got time today to dig out some official number for the LiFePO4 cell, here you go: Capacity: 6.5~6.8Ah @ 0.5C Continue discharging current:...
hell ya.. these 3D print are strong but only good for prototyping, each blade took me 22 hours + occasion failed print. 140 blades = 3080+ hours...
100A+ will only happen at max acceleration and deceleration. Remember I have been running the home-made version Lithium on Gen2, Gen3 for more...
[ATTACH]
Here is your special one, no BS. that connectors and cable are corroded from all that KOH leak for the past 14 years, let me clean it up or maybe...
you don't need to cramp these lithium blade to charge/discharge. The only time it could swell is overcharge and trying to destroy the cells. The...
Good question, how service plug works is it connect to #10 block (Gen2) directly and cut the voltage in half when disconnect. since the Lithium...
There are 10 packs sending out to testers around the world, quite a few are on PriusChat so grab your seat and enjoy the show :)
It's testing time gentlemen !! [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
The display switching between voltage, Amp and some other information, we were in a power outage + 100 degree situation so didn't read the user...
Just last week we have this power outage in my neighborhood for days, and thanks to my Prius I am the only one with lights and Netflix for days in...
hey guys, just login and see all the discussion, I am grateful that @ASRDogman keep everything in check, a few things to clarify : 1. The weight...
you spot it. I've been testing in SoCal 100+ degree for years, I've even turned off battery fan for long period of time and the Lithium just...
more pictures straight from the factory, I personally designed and printed all these cases one-by-one with Creality CR-10 3D printer, each case...
Hi everyone, thanks for sending me inquiry about participating in the testing but all the prototype has been booked and some of them are ready to...
yes sir, it weight 50% less than the stock battery, theoretically it could be 1/3 but with the added safety features and heavy duty copper bar it...
