Separate names with a comma.
I determined that the spark plugs were counterfeit, and once I put the original plugs in there seemed to be no issue! I should have dug into the...
I started a piston soak with seafoam yesterday, and will be turning the engine 5 times and adding more liquid every 12 hrs or so. I also bought a...
Well, the new fuel pump got here and I tested it for pressure. 0psi. Huh, I could hear it running... I then made sure all my fittings were tight,...
So I got access to the fuel pump this morning. By the way, one of the reasons I am suspicious about it is because when I took the rail off there...
I actually did not check that in techstream first, though I did get a code for Cyl3. I was thinking that the plug and coil from Cyl3 were not the...
I swapped some stuff around to see if there were misfires on different cylinders. First I swapped plugs and coils for Cyl 3 & 4. I did notice a...
I would think that you would be able to find a hose somewhere online and have an independent mechanic replace it for you. My (uneducated) guess is...
Was this ever resolved?
Time for an update. I learned more about these water pumps, and found that the impeller from the older engine spun more smoothly. I put that...
I am in a similar situation to the OP, I have a charger and harness for my Gen 2, and would like to use the same charger on the Gen 3. This...
Also, unless anyone wants to come and get my spent engine or have me mail them parts I will be taking it to the scrap yard in a week. So far I...
I am second guessing my thought to replace the water pump without diagnosing the one from the "new" engine. If it is actually operating fine,...
I am not sure exactly what you mean by backflushing the heater core. I put in the vinegar solution and turned on the car and the inside heater. As...
I am wondering if a clog already happened. Right after I posted then I got a p261b code for ENGINE COOLANT PUMP "B" CONTROL MALFUNCTION. I am...
So much has happened in the past few days. I successfully did the sway with no hoses, wires, or sensors missed! I did have to reuse some stuff off...
I finished getting the engine ready to be lifted out. I am keeping all my different fasteners in labeled bags, but I am paranoid about missing an...
My travel plans changed a bit, and I am in town this week. Today I started to tear into the engine compartment, and have pretty much disconnected...
I just got back from my honeymoon! hence no reply for a while. We went to northern Italy and Austria to see some of the Alps. Specifically to...
Hmm, interesting suggestion. I doubt that will be it, but if so I would want to know. I will try that next I suppose.
I just checked the connection that goes from the car to the sensor. Everything seemed fine, no corrosion or bent pins.
