Separate names with a comma.
So this problem went away for a long time but now I keep getting the issue with something attached to the left front sensor. It started happening...
Perhaps a better way to say it is that I cranked it it to see if the knock would go away while the engine was turning without any ignition. Just...
I did clean the intake a bit (including the little ports) with brake clean when I had it off. The knocking remained, including when I unplugged...
Well, my experiment with swapping injectors and plugs did not go quite as planned. I put everything back together and started it up only to notice...
When I stuck a rod into each spark plug hole it came out basically dry. I am thinking to replace the PCV valve, and swap plugs 1&2 with 3&4. That...
Ok, so you are suggesting that the leak is one way. I guess the only way to really find out for sure would be to scope the inside and look over at...
OK, so today I had a simple plan: replace 12V, take out the space plugs, crank engine to get rid of any liquid, put plugs in, run for a while to...
I was wondering about block and tackle. I AM in a garage with a ceiling, though renting a cherry picker sounds best if I can find one. OK, so...
As I have thought about this more I am leaning in this direction -> get a JDM Gen 3 engine. I have never done an engine swap before so anything to...
Since I do not know how long/often it ran with this issue I do not know the extent of the damage. I am not opposed to doing the whole engine,...
Thank you guys! I rented a Dolly from Uhaul and used my Tacoma to get it home. It turns out that the seller incorrectly listed it: it is a normal...
Hello, Yesterday I picked up a 2012 prius that I found on FB marketplace. Blown head gasket, 230K, torn up seats, $2250. Pretty good deal I...
Thank you, and I found how to post a thread, here it is: PIP New to me | PriusChat
Hello, Today I am going to pick up a prius plug in that I found on FB marketplace. Blown head gasket, 230K, torn up seats, $2250. Pretty good...
That is great news about the gasket! How did you see the bent rod? piston head not quite as high at TDC? What was involved with "rebuilding head"?...
I wonder if the OP has any more progress on this in the past several months.
12 years later, this is still great info. Thank you! Through some trials and tribulations I built this and it is installed in my 2008 Prius. I...
Well, so far so good, it seems like it just needed a little cleaning.
I took it apart and cleaned around a bit. A lot of dust and built up grim but no metal pieces. I then took it up to 82mph and no lights, so we...
I have looked at the code with Techstream and it says there is an object stuck inside front left hub.
