Separate names with a comma.
Ok performed the ATF change. I was a bit disappointed as it wasn't that bad, a little build of gunk on the drain plug for the 2008. No dramatic...
did you ever sell this setup?
Well seeing this thread will be doing the first ATF change on a 2008 prius with 250k. The dealer never changed it up to 80k said it would be...
I just did a water pump, belt, thermostat, control valve change on my 2008 Prius. I was getting a p1121 code so felt the control was the issue. I...
Looks like you forgot your login/password and had to create a new account like me :).
I have a similar problem Prius 2008 200k, had p1118 code, notice some leaking/build up around water pump. So replaced that along with thermostat,...
Your only issue is going with a too small filter, a filter that does not filter at the same required level, or a filter that is physically unable...
PS. I did this because the 7 year old 12v batter died and my brother tried to jump the car and connected the jumper in reverse order. He works and...
To replace this unit is fairly simple and straight forward. 1.Buy the replacement part (Cost me $55 on sale from the Toyota Dealership). 2.Make...
Study the connection points first. Knowing before makes it a simple task to located the correct spot on the old unit.
Remember to first disconnect the 12v and HV batteries.
Then release tabs holding the 4 pin connectors to bottom of fusible link module. The Module will then be free to replace. Reinstall in opposite...
Pull unit up high enough (not any higher) to remove remaining nuts holding wires in)
Remove nut then release tab to pull black fuse box out of the way.
Loosen Tabs, pull unit out enough to get to the nut.
Remove covers and remove Nut and wire
yes i reset/reseed the immobilizer first. however at this point the keyfob i used as the master had a dead battery. Also when it asked for the...
thanks for all the previous discussions. I had my keys then my car stolen. Thief was caught red handed but managed to dispose of the keys. Due...
it sounds like the immobilize never was taken out of initilize mode after the fob was added to the system.
thanks for the info. In process of doing this myself. Lost all keys to the car, just got a Used Fob to work still need to program the keyless...
