Separate names with a comma.
Reviving this thread because I am thinking of selling the car that makes the suspension noise and i was wondering if the sway bar bushings...
This is what it looks like with the material removed. Was a little bit of a chore but the plastic was soft and I used a oscillation inch saw to...
Looks like I need to remove the plastic that is “highlighted”by a silver sharpie [ATTACH]
If you replaced the catalytic converter after a theft, I have found that its pretty easy to damage the heat shield that is just behind the cat (...
that's good advice to look into the rack. I am going to put in all the parts I have on the way and then I will see what is left to diagnose. I...
I got the car with the rear headlight tab broken off. Car was definitely in an accident and i assume that the body shop didn't bother to repair...
I have new struts and ball joints on the way... will be replacing those as well as stabilizer bars ( and sway bar bushings if they don't look too...
going to revive this as I attempt to put in the OEM part to repair the tab.
I have several cars and I am not the most organized. One of my oil changes was missed and I went between 7 and 10,000 miles. The oil was low...
OK.. the air selector motor is cleaned up and back in. All things considered, it was probably a lot easier going at this part from under the dash...
Want o share how I attack these brittle clips. They usually snap if you pry with a screwdriver. I take an old plastic card like a hotel key and...
Got it out. It was possible using a screwdriver above the large silver module thing[ATTACH]
dug in again today with my new ultra low profile screwdriver. made getting out the first one easy but the inlet select motor above is a puzzle....
Accelerator pedal is held down by two 10mm bolts. One is under the temperature blend motor. In retrospect I probably should have looked to...
I was just looking at rock auto and saw there were 3. Yikes. What you said also makes sense because the amount of noise changes most when I...
I just removed the motor right next to the accelerator pedal that I believed was making the noises in my dash. After cleaning it up the noises...
Turns out that’s the ground Well i got it because my other 2007 that’s have owned for 4 years came with it. I love the option for the self...
[ATTACH] I found advice on YouTube. I had the wiring wrong. On gen2 white/black is ground black is acc power and red is constant power....
I picked up an OEM Prius self dimming mirror with about 12" of the wire harness a few years ago... never used it. I have a 2007 with the standard...
Going to hold off on the struts for just a little while. will post back if I do the swap.
