Separate names with a comma.
No, the overheating on the left side destroyed the bearing on the left side. Why the right rear bearing started failing has nothing to do with the...
See the details in my post earlier. :) The rusted slider pin led to the calipers not moving freely which led to dragging on the left rear wheel...
Here are my readings for the last few fillips. Summer makes a huge difference: [ATTACH]
I've never tried cooking in the car while moving, because I'm afraid of spilling, plus the steam from the rice cooker might fog up the windows....
So far, I've never had to use my 1kw inverter equipped Prius to run things in the house. But for camping trips out in the wilderness far away from...
Evidently - get enough heat, I imagine the bearings don't like it - maybe the grease especially doesn't and the heat starts breaking it down. But...
About a year ago, I noticed that turning the steering wheel from lock to lock at slow speeds (like going up my driveway), caused a clicking noise...
Here's an update to my original post: The dealer replaced the Left Rear ABS sensor, wire harness, caliper, wheel hub and bearing assembly (all...
Do you think a Toyota dealer would be willing to do that (disassembly, cleaning and lubrication), or will they just want to replace the caliper...
No, none of the brakes have ever needed any repair before. I had to have the steering linkage replaced because the universal joint was going bad...
Boooooo! :cry: So when the master mechanic tells me I probably should have the caliper replaced on both sides (assuming rust was the problem with...
Yesterday morning, when starting my 2010 Prius, the red BRAKE light stayed on, and also the yellow Traction Control light and yellow ABS light....
Nice video. To secure your Prius from being stollen while running, you can use the emergency key of the key fob to lock your doors once the Prius...
I bought my 1K pure sine wave inverter for $260 (Xantrex Prowatt SW 1000 from Northermarine on eBay).
When I mention "fragile" it has to do not with the plastic parts, but the battery posts themselves. Is the plastic there to reduce vibrations to...
What is the purpose of all the plastic at the 12v positive battery post? And the loop at the negative post? Is it to support the cables, and keep...
After doing some research on the cable from the DC/DC inverter to the 12v battery, I'm not so sure it's able to carry more than around 600w. It's...
Got it installed! I'll do a write up with pictures soon. Sorry I've not done this yet, I've been really busy. We've had lots of rain, and a...
Thanks, it's encouraging to hear from others about this. This evening, I climbed into the trunk and measured the outside of the white wire that...
That has got to be the dumbest ad I have ever seen. What airheads at Toyota approved this ad? It's simply awful.