Separate names with a comma.
the now start even with bent rod it runs here are the codes im getting [ATTACH]
I found another engine with 10k on it for 1450 out the door. But now my car wont start I put all the fluids in it but forgot the coils and plugs....
All cylinders123 go to the mark on the right number 4 goes to the mark on the left at tdc So I guess new motor time. So the 2zrfxe 2016 should...
I did not send the head to a shop it looked flat and checked with a straight edge. the car has no codes and good compression. I took the valve...
already did.
Back story 1.Car had the morning shakes (cleaned EGR circuit ran fine then next day same thing.) 2.Realized issue was blown head gasket, Car only...
in the end what was the issue.
I replaced the haed gasket and replaced the valve seals. I feel I may have over compressed the springs as to why I am dealing with missfire (weak...
I have an issue with my car and may replace the cams and valve springs. I can get a used set from a 2010 prius with 160k that threw a rod the top...
once I get the car running right I like to monitor the care... RPM MPG etc...
The issue is the car has no codes
Funny a rebuilt engine costs 1500
I'm thinking that is the best option right now. The dealer
are all odb mostly the same?
Tech has explained only miss fires at 40 MPH and all components swapped issue persists on #4. He said may be clogged cat or mechanical issue...
is this software or odbII whats your setup?
Can anyone recommend a ODBII Bluetooth reader along with software to read codes with.
yea I don't know at this point. I was unaware the engine was not firing on Decel so I am at a loss as to what is wrong. If he can figure it out by...
First test gave 160 psi on all four and second test yielded 150 to 155 each. I suspect difference in tools but still with in specs. The behaviour...
No I'm not driving. This is the progress the mechanic has made he has explained that the engine misfires on number four but only when...
