Separate names with a comma.
My newly purchased 2010 Prius with 229,000 miles has a blown 40 amp fuse for the A C compressor. And, I was getting P0AA6 codes, yellow triangle...
Thank you. Now a lot makes sense. We are getting way off topic. I will go to the A C section to try to learn more.
I read the shop manual instructions and am surprised that it did not require that the dryer and condenser also be replaced. A youtube stressed...
Tom, I was interested in how you test a compressor. When I buy one from ebay, I would want to test it right away. I understand that you can just...
Update: I measured the low side (unfused) again this morning. It still reads 0 ohms using the Vici tester on 500 volts. And, 1.9 Mohms on either...
I think that the zero ohms on one line of the compressor cable tells me that the compressor is faulty. Is that a bad assumprion? I think that all...
I did also replace the nuts. My battery is old, so maybe that is part of the problem. CRC makes a spray-on "Battery Terminal Protector". I will...
2010 Prius P0AA6 code and has yellow triangle with "Check Hybrid Ststem" I get a P0AA6 code but the subcode (details) code is not known. A...
I replaced my bus bars about 3 months ago. I bought solid copper bus bars. I figured that Toyota knew what they were doing to not use nickel...
Creader Elite My $122 Creader Elite came today. I did the ABS air bleed procedure as instructed. The steps seem to be the same as for a...
Is the Creader Elite Toyota tool the cheapest tool to do an ABS air bleed? It is $116 on ebay and is supposed to do the brakes, and, I think, the...
O K Thanks My real issue is trying to do an ABS air bleed after replacing the master cylinder and booster pump. A message reads "Lost...
Does this mean that I need to turn on my Wi-fi and download something from Toyota? Nice try, Toyota. I thought that I had all software and should...
I hope that the stroke simulator does more than just give me a nice simulated stroke feel. I just want the brake light to go out so I can get the...
Thanks. I did replace the booster and the master cylinder. I did the ih8mud thing with VirtualBox, WinXP 32-bit and MVCI. After bleeding brakes,...
Maybe it is too many terms meaning the same. Is linear valve offset the same as zero point calibration?
They just gave me a $25.48 refund. That is close evough. I am happy.
For some reason, my post is missing where I wrote that the above ad is from cable #2 vendor. And, I ordered a new 40 amp fuse for my A C. ($31)...
Cable #2 ad[ATTACH]
I tested the $55 cable (no software) and it did not work as well as the original cable (cable#1) that I bought for only $30. So, now, I will wait...
