Separate names with a comma.
Thank you Chapman. Very interesting. This is exactly the information that I needed. .
Yes, I did get the codes prior to replacing the inv pump.. And I got the P0401 code before cleaning the EGR valve, cooler, pipes and intake...
Chapman, Very interesting. During the times that I checked for the pump running, the inverter (and engine) were cold (88 F today). So, the SWP...
This evening, I started the car and waited for it to turn off but stay in READY mode. I looked again for turbulence. I could see a reflection in...
Hey, Tallguy, I read your post where you wrote that replacing the inv pump did not clear the codes. I am having the same problem. I had P0A93 and...
Last night I applied voltage to the old pump from a battery. I thought that I applied the correct polarity. I figured wrong. It shorted the...
Thank you Tom. The cable at the fuse box had 12 volts on the pink wire. I don't look forward to replacing the pump.(101 F today) I read a post...
Is there a fuse or relay that can stop my new inverter pump from working? Is there a place in the fuse box where I can check for 12 volts going...
I still get codes P0A93 and P0C73 after replacing the pump. It may have worked initially because after filling the reservoir to max and briefly...
Thanks, Tom I just ordered a fuse. I will let you know what happens.
My 2010 Prius sat for 2 years unused. I found that the A C blows warm air. I checked for corrosion on the A C connector but it is O K. I found...
I cleaned my EGR valve as good as I could. It feels free and easy when pushing the plunger with my fingers. Sometimes the valve still sticks...
I spent 2 or 3 weeks reconditioning my Prius batteries with 2 CQ3s. I finally was able to get a reading above 5000mah on each module. Then, the...
229,000 miles
My 2010 Prius reports a P0A93 and a P0C73, both telling me that the pump is bad. Also, there is no turbulence in the inverter pump tank. Replacing...
Thank you. I should have time to try those things next week. To me, it is so amazing that the car has so many transducers. It knows everything.
Where can I find instructions for the T.S. ?
Tom, I just tried again. I plugged in the USB last (with laptop already turned on). IT WORKED!!!!! Now I need to learn how to use it. Will it...
I got into new screens. The red light in the OBD clear shell has always been red. It never changed to green. Here are the new screens.
So, maybe my problem is that I need drivers for the cable? Are there drivers for the cable? The cable is a "MINI-VCI J2534 Standard OBDII...
