Separate names with a comma.
I'm with JC91006, I have had several Prii in my shop with batteries is all possible states of charge and have never seen something like this...
Anything with a rebuilt battery sets alarm bells off.
That's part of why I said it should be fine without it.
If you don't have one, you can still try and see what happens. If your battery gets low, it will not complete the calibration.
Wait, do the calibrations first. First: Techstream > ABS/VSC/TRAC > Utility > Reset memory > follow directions. Second: Techstream > ABS/VSC/TRAC...
Did you do the zero point calibration?
B1421 is normal. The other could have been a result of testing the battery. Now that they're all cleared, it's time to hit the road and see what...
$10 says it's B1421!
Yes, so the battery doesn't go dead.
Brake fluid pressure, not level.
The buzzer usually indicates low brake fluid pressure. Was anything done in between that you think might have caused this new problem? There is a...
You might try it for five or so minutes and see if you get a code without the battery charger.
Sorry, I recommend you connect a battery charger to the 12V battery while you are performing this test as the cars charging system will not be on...
Have you heard the buzzer sound this whole time, or is that something new?
Next step is to see if the code sets with the key on but the car not ready. With the key in the on position and the car not ready, clear the code...
Luscious Garage | Blog | Toyota Hybrids P3009: High Voltage Leak Detected, internal to battery
WHOA! WHOA! WHOA! To date, I have never seen a defective skid control unit. I've seen tons of other stuff, but not that. I have also came across...
Fine, what about something like this: CatClamp Catalytic Converter Theft Prevention Lock ;)
I know I could remove these, and am pretty sure I could do it with the same tools they showed in the video. They are in no way impossible to...
Did you watch the video? I'm sure you can think of a way they didn't try in it. [MEDIA]
