Separate names with a comma.
I can't recall seeing a separate temperature probe anywhere, including parts diagrams. Therefore, you and Chapman would be correct that these...
Did you pull the rear Cat pipe loose for drainage? I'd be worried about possible fire inside there. Could blow some compressed air into there as...
Then, maybe the P0420 code is related to an O2 sensor? I think those should be replaced as this car probably has the original ones after 185K miles.
I'm certainly not an expert on Cats or scanners but the Innova scanner manual has the following on these data. It seems to indicate the data are...
I'm thinking the Gen 3 with 185K on it has never had the O2 sensors or Cat have ever been replaced. I'm planning to do the sensors in any case. At...
Test Drive Update: The Gen 3 really sounds good and runs well. I used the CRC Intake Valve and Turbo Cleaner via the throttle body to attempt to...
Interesting kit there. I probably would use it if I'd seen it a couple weeks back. At this point, I've thoroughly cleaned the EGR and intake...
Coolant level looks good. I didn't get any instructions with the catch can and I mounted it maybe 10 inches higher than the PCV valve. I'm not...
I really haven't done anything. Need to verify 12v condition first. If not, I think somebody jumped in improperly and blew a fuse or fried the...
I pulled the PCV valve and it was allowing slight air bypass (when I blew into it from one side) and unrestricted air bypass from the other. So,...
Oh, I see, Leawood. Cool. I do have Dr. Prius but will need to search for my OBD2 bluetooth thingy. I also have an Innova scanner that's pretty...
You live near Waterville Maine or Lenexa, KS. The car is in Maine.
There was a hint of rough idle as well which could be related but no check engine light at this point Is there a way to diagnose it or just better...
The Gen 3 is back together after getting a new (well, new to me) input damper and a thorough cleaning of the EGR system and intake manifold which...
I was concerned that the vanes or fins in there might be damaged by high pressure. But, I'm sure a number of solvents and detergents would work. I...
The input damper plate (damaged by previous misfire) has been replaced, EGR system and manifold THOROUGHLY cleaned on this 2013. 12v battery was...
My Gen 2 won't start but might be several months before I can get to it. Dash do lights come on when jump pack is attached. Is it beneficial to...
In cleaning the EGR cooler, I've done all of the following: 1. Boiled it in water plus OxyClean. 2. Boiled it in plain water. (After each...
Thanks. I've heard the 08 and 09 inverters are better than the earlier gen 2 but do not know whether that means they're better protected against frying.
I will start with battery testing. Assuming the battery is good (it's only about 6 months old but still could be defective) do you have an opinion...
