Separate names with a comma.
Get the codes read ASAP. As a WAG the one and only one restart after a 12 volt reset points toward a high voltage leak. Does anyone know of any...
Techstream starts the module count opposite the battery computer. It appears you started your count at the battery computer. So your #6 is in...
Thanks for following up. It really helps the next guy out. As long as you do not run your engine dry it's still good for another 100K miles. Brad
Close to 100% of the Gen I batteries have at least some corrosion on the voltage sensing wires at the the battery terminals. Somewhere around 1%...
As long as you keep the oil level up your engine will keep running for a long time more. Let us know if low oil solves your mystery light. The...
Check your engine oil level. Now! The red triangle is used as a low oil pressure warning light. Hard braking or turning will cause the oil to...
Yes, the Gen I count starts at the battery ECU. The Gen II 2004-2009 count starts opposite the ECU. For the P3026 code to be set pair 16 was 1.2...
How did you measure this capacity? I really doubt you have a packs worth of Gen I modules with 5000 mAh capacity. If you do you have hit the...
Call Steve. You can not find anyone better at batteries. Brad
You should hear three clicks. There are three relays. A positive, negative, and precharge relay. The precharge relay connects through the big...
I'm curious. What do you charge to rebuild a Gen I pack with Gen II modules? Brad
I have a dissenting opinion. A Dorman remanufactured battery with Gen II modules lists for $1939 at Napa auto parts. A new Gen I battery from...
Every time I think you are catching on you go off on a tangent. What you are doing to those modules is abusive. Can you see the difference between...
How fast are you discharging? Doing three in series to 12 volts could be hard on the weaker modules. The three modules could be at 6,6, and zero...
You have lost me. What charger? What rate are you charging at? Are you discharging also? How many mAh are you putting in the modules? At a 500 mA...
Back in 2009 rebuilding a Gen I battery was a good option. In 2016 there are just not enough good Gen I modules left. Gen II modules can be used...
His modules will be dead before the charge has a chance to do any harm. A 20 amp discharge to 1.2 volts will ruin them. 1. 20A discharge to 6 V...
This charger? X120 120W Touch Screen Smart 6S Balance Charger That charger is limited to 3 amps and 10W on discharge. 10 watts / 7 volts = 1.42...
I do not recommend swelling modules, but it really does not do much harm to them. Was this a under or over 7.2 volt module? When over charged the...
1 amp is high for a LED driver. Most run at 350 or 700 mA. These are more money and hard to justify for just one pack What is a good way to...
