Separate names with a comma.
If you post some pictures we would be able to help more. I think you might be referring to the axle shaft not fitting into the hub assembly? You...
Behind the intake manifold.
I have left Prii batteryless for extended periods of time without ever having had to do reprogramming as a result. I have also had AAA jump start...
There is a small metal piece that usually breaks when the shifter is ripped out of park. Toyota does not sell this separately. I have one that I...
Most things can be fixed back to normal. Curiousgb is dead on. You need to find a new alignment shop. Let me, an ASE certified master...
Iv'e re-used several gaskets without a problem. They always stick to the pan nicely. I've actually never changed one, nor has one of the ones I...
Change the trans fluid first.
Next step I would take is remove the high voltage cables from the inverter and insulation test them.
It connects behind (towards the top of) the inner fender (aka fender liner).
If you decide not to go further yourself I could diagnose it for you. The only problem is I am 100 miles away.
Now see if the code appers after you ready the car. This would tell you the problem is not in the battery. Stators are known to cause P3006 codes....
Turn the ignition on, do not turn to ready, clear the codes. If the codes come back while the car is NOT ready the problem is in the battery.
I'm pretty sure either the TSB was not updated due to the campaign, or the link is to an old copy and there might be an updated one somewhere....
Except spark plugs. The ones they sell at the auto parts stores (here) are if inferior quality compared to those they sell the manufacturers.
I would have to really dislike you to install those in your Prius. Myself, as well as many others int the automotive repair community do not like...
Good question. Seems he just missed the warranty.
Some in my industry refer to them as Government Motors
I have yet to see a failed Prius thermostat or belt idler pulley. I also doubt SLLC and ZEREX Asian are the same thing and see no point in not...
There is a small electrical switch that is pressed when the shift lever button pops out all the way. This button seems to always get damaged when...
Before the campaign started there was a TSB on inverter pump failure which is where I saw that. The above are the campaign instructions. Bottom...
