Separate names with a comma.
[ATTACH] Just finished 4 Engine rebuilds in one day! It took about 10 hours to put together the head and block using all torque specs from the...
Get the car running again until the radiator fan turns on. Then physically touch both upper and lower radiator hoses to check to see if both hoses...
This was a core that was returned to us from a rebuilt engine purchase. Unfortunately we do not have that information [emoji22]
Yikes! [ATTACH] [ATTACH] [ATTACH] [ATTACH]
Very good question! Gen 4 block has extra Cooling ports that do not match up with Gen 3 head. As for efficiency it’s best to keep with the Gen 4...
Start with the ground wires that attach to the valve cover. Very important to get the proper ground [emoji3514] also need the engine codes that...
Wish I can agree, but there are several ports that are blocked up using the Gen 3 gasket on a Gen 4 block.
Not the same, part numbers are different per Gen
The part numbers are for the Gen 4. Look at the Valve cover it’s different.
What year Prius? Looks like this is for the Gen 4 Prius 2016+ iPhone ?
Yes indeed! Very frustrating because a simple headgasket job may lead to an entire engine overhaul.
Very good write up! I just beg of you to replace your 12 year old struts and shocks in the future. You will thank me later [emoji3590]
Prius V going in for surgery! This was a head gasket Job but played it safe by pulling out the whole engine just in case it was bent rods. Car...
Another rebuild a couple of days ago. Another Head Gasket issue [emoji20] [ATTACH] [ATTACH] [ATTACH]
Yes indeed! Revised pistons and rings! iPhone ?
Ahh! We are well familiar with those Oxygen sensor codes. Old motor clogged up the upstream Oxygen sensor. Should have been replaced when doing...
The tricky part is getting the coolant lines routed correctly. Once you figure that out, it is smooth sailing [emoji106] Finally - getting all...
Your will need transfer the harness and ECU over to the Gen 3 and then figure out the pin outs for each plug. Until we get a customer for that...
Our SoCal Shop (Hybridpit) specializes on Gen 4 transplants and 3rd Gen Engine rebuilds. With our experience, there is no need to reflash the ECU...
