Separate names with a comma.
Yes. Install the replacement modules into the pack, then cycle the entire pack to normalize the replacement modules with you existing modules....
This covers the different variants of our products: What is the difference between the Standard and Discharge Ready Prolong Battery Charger...
If your going to go with module replacement (the lowest cost approach - but requires some labor), this is a good overview of the process:...
You hybrid battery will tell you when it is growing weak and when it is getting ready to fail. Here are the signs to look for: How do I know if...
I have to stuff mine to get 10 gallons into it. Lots of slow pumping the last two gallons, but it fits.
Did you press the Start button twice? It must be pressed twice to enter Ready Mode the first time after reconnecting the 12V aux battery.
I'm guessing you mean 246 volts? If so, yeah, that's within the range of normal. The car will never let the battery drain below 40% SOC. This...
Yes, absolutely. Our online store is here: Online Store - Hybrid Automotive Here is the Prius light bulb discharger: Prolong™ Simple...
Thanks. This is exactly what we tried to build. Something anyone can use. Regarding the speed, this is why we are releasing our universal...
If the OP has already determined he has two failed modules, then they should be replaced. I was speaking broadly in my response. To assume that...
Thanks for your order :-). Charging and balancing alone will not deliver long lasting results. To get the most benefit from reconditioning, you...
assuming you mean modules and not cells?? Why buy all dangerously high current hobby chargers to do 1/2 pack at a time when you can buy one...
Our products are designed for the exact purpose: Prolong Battery Systems. Extending the life of your hybrid. – Hybrid Automotive We...
Hrmmm . . . that is a really good idea. I'll have to talk to the EE about feasibility on that one :cool: There are a lot of factors that...
Hi Kevin, Yes, this is what out products are designed for. You can cycle the pack, load test to identify failed modules, replace them, and then...
We have the first enclosure prototypes being air freighted from China in the next couple days. As soon as they get here we will do final thermal...
Our Prolong Battery System installation instructions have the step by step process for accessing the battery cooling fan to clean it. We have...
In order to get all of our harnesses to plug-and-play, we had to buy a few of the pins and connectors in large volume direct from the factory....
You don't frequent the Gen2 forums much do you? OK, fair enough. Here is the original source of the independent techstream testing: Quantitative...
Yes, that's the one. And Eric is right, a full recon package would be a very good idea. While charging alone is enough to refill the battery and...
