Separate names with a comma.
You can read about how hybrid batteries degrade and fail here: Prolong Grid Charger FAQ - Hybrid Automotive If the dealer does not comp you a...
The Gen3 fan is quiet. You can test it with Techsteam, or if you have one of our Prolong Battery systems installed. Otherwise I suspect it will...
hrmm, sounds a little extreme to me ;). We've shipped hundreds of systems to FL. From a quick scan of our records, looks like his order was a...
Nice! Good luck with your project :-)
If you start maintianing the battery, you very likely can avoid replacing it at all :). You could certianly Prolong its life until later, much...
Sorry, maybe a dumb question, but how are you getting the sleep area so flat? Where are the front seats? hahah
Here are some before and after testing done by a fellow PriusChat member: Quantitative Results of Grid Charge/Discharge | PriusChat We have sold...
Recondition it, quick! It may be too late, but probably not: What causes hybrid batteries to degrade and fail? - Hybrid Automotive :)
A load test would give the best indication of module health. It can easily be done by following this process: Prolong™ Battery Module Load...
very low. We have had several customers accidentally do this. We accidentally did it ourselves a couple times. In all cases, after charging and...
Thanks, this is correct. It's ideal to step the load down as you get into the deep discharge levels, but we do have customers who miss the change...
I agree #13 needs to be replaced. If you have the time, cycle the pack a few more times (3-4 more times) and retest to evaluate the other...
It can happen, but even with MIMA (I had #157P) the battery can only be charger to 82%-83% max. Having an OBD2C&C to manually drive the IMA fan...
214 Volts is right in the range of what we would expect resting voltage to be. Sorry about the bad meter. Give us a call Monday (800-589-0730)...
Instead of waiting for the unexpected surprise battery failure, perform preventative maintenance to make sure does not happen in the first place:...
Incandescent bulbs have a power on surge load that can sometimes exceed the 3.15A inline fuse max capacity. We use a slow blow fuse to minimize...
Doh! Need more coffee lol. Thanks for the catch, I just fixed the post.
yeah unfortunately that will not work. Our discharger is wired in series. This is required to spread the battery load over two bulbs instead of...
If the battery is draining/filling rapidly, or re-calibrating, then a preventative maintenance reconditioning should be performed....
Yes this is correct. I regularly pull the pack to zero volts with the 25W (or a 15W) bulb before charging back up, and they perform excellent...
