Separate names with a comma.
Any more information regarding this ICE swap? Why would be a good place to start ;):) My '08 Gen 2 is still on its original ICE with 760,000kms...
Next chance you get, go over all the module nuts and check they are tightened to 49in/lb by using a 1/4' drive in/lb tension wrench and 8mm socket...
They look like tarnished and oxidised copper to me. I'd recommend polishing them on a wire brush or a sheet of wet and dry sandpaper using kero as...
Clean up the busbars to get a clean mating surface because they will now be arc pitted .... and voltage sensing wire tabs as well, give them all a...
May be the mighty MG will be allowed into the US by then ..... quite a range to choose from .... love my MG4 T1 Terry
Is this using the Zombie Inverter board that Damien Maguire developed, or another design? I see Johannes also built a board and used it in an Audi...
Not sure how to get the image to appear, but it can be seen the negative end terminal is affected more than the positive end (think I have that...
The cause must first be sorted, before anything will work to stop the corrosion and the wicking up the wires and damaging the BMS (battery...
Nissan is the car part of a very big company, maybe they were into the electric stuff in heavy equipment and buses and not the vehicle side. I...
Can you feel it at all in the steering, rocked back and forth with someone feeling different areas on the front cross member and chassis and the...
Yeah, the fuel injected model went well, even compared to the 1800 twin carby model. I converted mine to dual fuel, 60 ltrs LPG and 50 ltrs...
A little bit more Google research shows the 1800 type 4 as used in the transporter, produced 51kw, some weren't quite as generous and rated it at...
This is the reason for freeing up the pressure release mechanism, so any module venting goes outside the body work and not within the battery...
Driving both MG1 and MG2 using the Zombie inverter board, MG2 in standard trim pumps out 50kw, with a welded planetary, MG1 puts out 10kw as a...
110mm or 4.3" so it should fit in there and has an aluminium case that the modules fit in to make it a flame proof enclosure .... even though LFP...
Do you understand why they do that? I know that the aim is to length the max torque at a given speed. Field weakening in a permanent magnet...
Do you have any links to that project, that would help a lot. T1 Terry
Sounds great. I only need to cool the inverter and transaxle, and of course, the battery pack. The MG4 has two separate cooling systems, one for...
Thanks for the lead, but I think they were into petrol engines. I went through that stage in the '90s, build a number of the standard cast iron...
I have the ex taxi '08 Gen 2 with 750,000 kms on it (at least) and I'm thinking seriously of using this to repower my '74 Kombi, replacing the 4...
