Separate names with a comma.
Brad, Thanks for catching that. He's correct. Fat-fingered #8. #8 is fine. 16, 17, 15, 10, 18 in that order. Brad also has it right that the...
I just realized you posted a load test chart up the page... You need to address blocks 15, 16 and 17. You should probably address 10 and 18:...
The TP is nice, but it's very spendy. I used a pair of Turnigy Reaktor 300W units at about $70 each, and a $90 Walmart deep cycle marine battery....
I'm not sure with this one. I will likely be shampooing the interior. I have found the "Auto" formulation of Febreeze to be fairly effective at...
You're more than welcome. She got a car wash yesterday, and I'm impressed how well she cleaned up. Her interior needs a deep cleaning. Previous...
The sealing job was to address the Gen1 propensity for terminal leaks. As nasty as it is, you should be glad it's there and leave it alone. It...
Bob has it. Pull ALL the bus bars before you attempt cleaning, or you'll complete some circuits you didn't want to. That looks about as bad as...
So far, so good. Emissions passed. Car tagged and titled. No additional codes and ICE systems appear to be fully operational. Dog hair and...
My experience is that LRR tires have a fairly lengthy break-in period. It takes 1-2K miles for them to get "worn in". I have no technical...
Emissions testing, registration and insurance first... :) Now I have to see what the ICE may need... :)
Finally. The pack is in, though the installation is only partly complete, all connections are made, and data was collected. [IMG] 0.14V Max-Min...
Thank you Bob. There are definitely a couple areas of concern. I'll try to expand the community's knowledge base. Draco, I just load tested my...
I typically see 20-30A with very gentle driving and Techstream recording. I don't think 45A for a few minutes is an issue. If it is an issue to a...
I think I do it a little differently than Bob recommends. I go to a safe place and slip the brake as I keep it floored allowing it to creep...
Can't mix. They are different lengths and they have different internal resistance that can be problematic. Your plan is valid, but you will...
In case anyone was wondering... [IMG] I'm almost there. Modules installed in pack. Need to pre-charge the modules for the target balance point,...
If you've learned anything about me by now, Bob, it's that it takes almost no prodding to get me to comment... :) Coming from the Honda IMA...
I wouldn't say most based on the 0.3V delta between your high and low voltage blocks. Block 16 is low and may be an indication of a weak module...
This one worked for Gen1 & Gen2 and arrived pretty quickly: [MEDIA] I thought the buss bars were just in shadow. As Brad pointed out, those...
Wookiepedia merely documents Lucas' creative backpedaling once he realized he was in error... :)
