Separate names with a comma.
When the 12v battery is disconnected, all 14 battery blocks reset to the default value of 0.019 ohms until they are recalculated. I believe that...
No, it will not tell you how to fix a P0401 code. That trouble code is the least of your worries. Techstream can read the trouble codes, look at...
Can you please give an update on the Signal Soother evaluation?
Just highlight Techstream on the left side like the picture you posted, and then click on green start arrow.
Call Tampa Hybrid and describe what is happening and schedule an appointment for them to look at the car.
What were the "old" trouble codes that you deleted, and were they current codes? List them here, and you will get some advice on how to proceed...
The P0A80 trouble code for a Gen 3 prius only has one detail or sub code, which is 123, so there is only one troubleshooting procedure listed in...
Let me explain a little better what I was trying to ask you. You should be able to see live data in Techstream. I have not done it personally,...
What does Techstream show the pump is running at when the car is overheating. There should be two speeds listed. One for actual pump speed and a...
Do not clear the codes. I have not used the AP200, but you should be able to scroll or click on the different ECUs listed to see the trouble codes...
I think the coolant was pushed out the overflow tube near the cap of the reservoir. Look for evidence of dried coolant around the reservoir....
You can drive the car if you need to. It may stop and leave you stranded without any warning, and you would need to get it towed home or to an...
I am not familiar with the AP2500 E. Why not just buy the AP200, which is known to work very well with a gen 2 Prius.
The Dr Prius app is very limited on what trouble codes it can detect. Read the thread linked in post #2. The Autel AP200 is a good choice for a...
I am assuming that you have not gotten the car to start after you created this thread back in April: https://priuschat.com/index.php?posts/3445569...
If you are talking about the Autel AP200, yes, it will work for your 2007.
You need a better scan tool to read all the trouble codes, not just the one that you have already found. You probably have additional trouble...
The trouble codes point to a possible problem with the inverter. Toyota has an extended warranty for the inverter. Do NOT clear the trouble codes....
The first thing to do is check the voltage sensing wire harness that connects to the battery ECU. Check the connector for any corrosion. This is a...
FYI, the Dr Prius app is very limited with what trouble codes it can read. A better choice for a scan tool is the Autel AP200 for about $60 at...
