Separate names with a comma.
It was a real issue with GenII which had a bladder that could be damaged by over fill ... but GenIII-s do not have this issue as far as I can tell...
Four minutes is quite long though .... that is for heating ... it should shut down a lot quicker in warmer days. That is interesting ... my engine...
Says who ?? Come on that is a technique to try to do reliably equal tanks for MPG calculation .... if you do not care about that noone stops...
Do not beleive it !!! You won't have 75miles .... I did the same "calculation" with my GenII second tank ... stop cold on Cross Island Parkway...
Not sure if you can monitor RPM (car will not tell you) from the condition you describe (44F outside) and you were using the heating ... right...
I can confirm this behaviour.. I was totally sure that no power after a very short period of time .... when I open the door scangauge comes to...
That maybe the case on the GenII but NO power ... on the OBD2 power pins after about 30 sec in the GEN 3 ... So your ScanGauge is staying ON...
Short answer is No. OBD port is powered off about 10-30 sec after the car is turned off . So unless your car is left on the dungle is dead (no...
Well the average IS 0.05 you need to use 0.0999999999 not 0.090 :-) you can think of it better on a axis as the distance correspond the possible...
I have an account on Fuelly ... BUT anyone knows how to account for the difference of the SUM of mileage per tank and what the odometer says ......
The GEN III prius using a two level charging system 14.5-6 and 13.5-8 I have been monitoring this for a while .... when you start up the car will...
Of course I meant btw Toyota recommended and the 42/40 ... (what I use) I am not sure but 15-18 would trigger the alarm and would be considered...
Yes that also matter but no more than 3-5 extra MPG the most ...
Here in New York 10% Ethanol is the standard all year around... that can not be the reason... If this is your first every hybrid try the power...
Any idea where to get it beside the dealer ....???
I am not sure what your manual says mine says this on page 552: Recommended viscosity: SAE 0W-20 SEA 0W-20 is the best choice for good fuel...
You won't believe this, but same thing happened to me twice.... First the Gen II. And again after I got the Gen III not the first day but first...
For sure this will do that .... but I do not see that as a practical reason or the only one ??? Firstly, without some external monitoring THE...
Although I do not "know" exactly how toyota designed this but makes sense .... that voltage would be raised over a certain load (headlight on a...
