Separate names with a comma.
It doesn’t work. I replaced the gasket on mine and I thought the issue was solved, but it eventually came back. The leak was a combination of...
You really need the entire overhaul gasket kit to do the job properly. There are a lot of o-rings and gaskets which will need replacement. All of...
I don’t have the specs in front of me, but 3/16” is a few mm. Toyota lists specs in the FSM on the criteria for reusing head bolts, and several mm...
For what you paid (at retail) for the Fel-Pro Kit, you could have almost purchased the Toyota kit. Also, the new head bolts may be shorter due...
See below: [ATTACH]
Currently at 191k. Head gasket failed at 185k and was repaired. No oil consumption.
Glad we were able to make something work. The direct-sun and the lack of shade made polishing difficult so we had to use Plan B. Hopefully Gyeon...
I can do the brakes, you can direct. Why don’t you just bring it by?
You can come inspect my car’s head gasket repair. [emoji41]
I used the Toyota engine overhaul gasket kit, part #04111-37315.
The Prime may not be operational - we may be polishing and coating the car during the meet. So you may have to use your suicide sticks. Ray and I...
True, but that is more $$$.
You're welcome. .009" is way too much runout. For measuring runout, I use 5 conical washers under the lug nuts. Then I install the lug nuts using...
According to your signature you had a HG job done at 170k? New plugs would have been installed at that point....I would think? Where are you in CA?
The "intelligent tester" predates Techstream. In Techstream, or even in many aftermarket scanners, there is an option within the guided brake...
Probably not.
What is EGR cleaning fluid?
Lisle makes a spark plug removal tool for the Ford V8s. I do not have experience with the tool, but it may be worth investigating to see if it can...
They are most likely stuck between the subframe and the steering rack. Don’t ask me how I know...
They are the exact same studs as the ones used for the exhaust manifold. Not sure on the dimensions, but I would guess M8x1.00 or M8x1.25. Stud...
