Separate names with a comma.
don't be so pessimistic.... ;) on the more serious side: is there a company which makes qualitative WAY better studs? (I'm not really convinced...
& maybe pictures of the whole thing?
it'll cost toyota MAYBE 500 bucks to fix that & score points all over, but after reading this, I'm not sure if my next car will be a toyota////
yep, neither a good thing for the ballasts nor the bulbs/
rather a bad ballast/ switch the ballasts & see how it goes/
probably / BION StarCaller
that's from here How do you reset ABS light & yellow ((!)) ? | PriusChat
lug nuts are 21mm/ BION StarCaller
eibach springs will not bring you down low low, so the difference in driving is not so much / (actually, I was a little disappointed how little...
I did the same thing you did: just left it the way it was & hoping that the position of plus & minus connections is standardized/
I didn't have a problem with that/
melting was too much of a risk for me, I didn't want to end up with a hole in the panel/ just cutting it off might take a little bit longer, but...
I had the same problem the screws touching the door/ with certain songs the whole door panel was vibrating/ the screws were touching this little...
this one: Permatex 22058 Dielectric Tune-Up Grease, 3 oz. Tube [IMG] without a small amount of this grease I had a lot of friction resistance...
I have the same size tires as you (stock), 8mm spacers on the front, 25mm in the back - no rubbing at all with eibach springs/ BION StarCaller
I put a minute amount of silicone on the gasket - no more screwing around to get the bulbs straight, they really just slide in perfectly / BION...
just solder new cables in/ quick and easy fix / BION StarCaller
nope, not needed/ the only thing that can happen is that you mechanically unhook the door looks - you will not be able to lock the door nemore,...
so how would I know that it works once I activated it with techstream? BION StarCaller
you got an idea from what year on toyota was using this bearings?
