Separate names with a comma.
I am trying to decide what I should do for my next modification. I have listed three options in the poll, so please vote and let me know. I will...
The tint on your Sienna was simply done poorly...by an inexperienced installer. Hand cutting each window is the best way to account for the "play"...
It really depends on the area. On a recent trip to Orange County I'd guess 7 out of 10 cars were tinted illegally. Around here, I can go a week or...
I would just find a different dealer. Or you can try a Lexus dealer, they are usually more professional.
Very nice color. Much nicer than the Winter Gray that i have. Congrats.
Energy Saver A/S without a doubt.
Sorry to bump up an old thread, but I am curious if the MAF had a layer of buildup. It sounds from your description that most of the buildup was...
Found it, thanks: TB cleaning As I thought, removing the entire air filter housing is the way to go. That would allow me to clean the...
From the posts that I have read, this is a good service to do periodically because it supposedly gets gummed up more frequently on the Gen II....
Thanks, I will look into that. You should also remove your VIN from the PDF before posting. :p
There is no need to bleed the system after a top-off. Just fill with Super Long Life Coolant to the proper level, and don't worry about it further.
I have seen a Seafoam type treatment improve drivability on older cars. On cars susceptible to carbon buildup (some higher performance engines),...
How are you reaching those values? For instance if you desire 42 psi, you should inflate to 44 or 45 psi, and slowly let the air out in 0.5 psi...
1) Yes, the radar cruise control would have been nice considering the amount of highway driving I do. Plus the leather seats are likely more...
[IMG] This is for amusement only, but I've gotta say that it is so much quicker and easier than getting out my pressure gauge. ;) Interestingly...
Right, but it is different, and in some instances for the better. Without the coolant heat storage pump that makes cooling system service easier...
I have both the EZ shim and the shim spacers already. I just have not decided if I should install them since one side is at 0.22, while the other...
Of course, but these issues also illustrates the potential risk. The frequency is a different stories, but understanding the potential issues (and...
Top-end decarb involves an in-tank cleaner and a seafoam-type product that is injected through the vacuum lines or throttle body. It is effective...
First of all, get the 125k. 100-125k is likely when a lot more failures will occur. Most Gen III are still under warranty right now but some...
