Separate names with a comma.
So she's just spending your inheritance then :ohwell:
Yes, if you press the top left button to turn park assist off, then pressing the bottom left button cycles through the different options. Don't...
How fast will it go in reverse on a flat road, would I be able to throw a J-Turn to escape baddies ?:D
Self tapping screw and a rubber washer should do it. :bolt:
On the UK non PIP Prius Nav, I have these curving as you turn the steering boxes in yellow, showing where you will go with the steering angle...
Maybe there's a spare under the passenger seat ?:rolleyes:
My Gen 3, not PIP, says 11.2v on service screen and measures 12.75v both at the battery and the jumper point under the bonnet, quite a difference.
I have the same problem on mine, but the smeared area is a lot smaller and it does it on the wash/wipe as well. I have tried new blades, not OEM...
OK so I spelled Anthena wrong, I thought it was something on the US Prius that we didn't have in the UK. But what's a rock bank ? Is it somewhere...
Yup, I weigh about the same as eight Prius spare tyre & jack kits. :embarassed: :pop2: :hungry: :pizza: :couch2:
The only time I've experienced a very slightly noticable change when the engine cuts in is when I used cheaper supermarket fuel.
Go on I'll be the first to ask, what's an Athena ?
I was asked once, I just told them my Prius has a 230v battery that would fry their electrics :laser::flame: .........they sought help elsewhere....
Are you sure you have the latest OS in the IPhone ? (OS 5)
If worried about the Oxygen permeating out so much, put 28% extra regular air (which is 78% Nitrogen) in your tyres, wait for the oxygen to...
Here in the UK they are the same as the 2010 except they are a darker grey.
Using 48 as the starting point, I reckon that's a 33% increase. 64/48=1.33 Alternatively, using 64 as the starting point, 48 would be a 25%...
+1, I had this message and unable to select gears when I hadn't shut my driver's door properly.
Obviously a Troll, now go back under your bridge :lalala:
No need to dismantle, just wind the window fully down and clean the inside of the seals with a cloth soaked in windscreen washer fluid.
