Separate names with a comma.
What city are you in?
The keys are usually lost in between the driver's seat and the center console. That edge is where most keys are lost and never found.
Strange how that paint is just peeling off. Was that painted over before? Is it OEM? I can use a spare black bumper
check your 12v battery, may be dead
I have them available in SoCal. Send me a message, I'm close to pasadena
If there is a key in the car, you should not be able to lock it. Also you can try just going in the car and pressing the start button without a...
Or you can simply hook it up to any 12v power source and it should turn on. If you did break it, no worries as they are really cheap online. I...
1. What equipment are you using? 2. If you fully charged the modules, if they are healthy modules, they shouldn't reach 7.32 volts for months by...
Only thing that moves the water pump is the belt and pulley. Without the belt, water pump can't move.
Since there was confusion on where the positive and negative would be, I didn't want the OP to possibly get the connections too close together....
no, you need to get to the negative terminal on the battery to jump start it.
in your diagram, A and B are the same terminal (positive). Negative is what you written (NEG)
I always connect positive first
The terminal to the left (reading from the battery), is the positive (facing the front of the car). The terminal closes to the rear end of the...
How did you verify the water pump, belt, pulley was not making the noise? I would bet those are the problem areas
Since you have the picture, you can send it to a local repair shop near your place for an estimate.
1. The problem is not your gas cap, that would only light up the "check engine" light. Not all the lights you listed. If I had to guess, I...
I would only suggest you read the code when it comes back. The basic stuff you've covered so it can only be something that the computers are...
Have you checked the inverter coolant pump? see if it's working? Open the inverter pump reservoir and see if the fluid is moving rapidly when...
I'd suspect your hv battery is causing the issues. If you have a scanner, you probably would pick up codes relating to the hv battery.
