Separate names with a comma.
a little correction, for the past 3 summer :)
Hi there, sorry all prototype have been installed and testing.
I only worship the software developer from Tesla :giggle:
I can not agree more, that's why we are doing this expensive larger scale testing in different part of the world to make sure we cover all cases!
excellent, voltage diff is only 0.05v IR at 9 mohm, 1/3 from your original pack. looking forward to see the MPG gain.
I have the same question about IR, turns out @AzusaPrius took that scree capture right after the installation, it was still having the IR from old...
I will ask one of my testers in Sweden to try Hybrid Assistant and find out the difference.
GS is using the same blade so yes, also the Camry hybrid 34 will be supported.
I believe Gen1 battery is in slight different form, I need to find a donor car in Los Angeles area to measure them up.
yup, still tweaking the final 3D design, ex: the temperature sensor holder at the bottom of the case need to be tighter by 1.5mm I am printing a...
ok, got time today to dig out some official number for the LiFePO4 cell, here you go: Capacity: 6.5~6.8Ah @ 0.5C Continue discharging current:...
hell ya.. these 3D print are strong but only good for prototyping, each blade took me 22 hours + occasion failed print. 140 blades = 3080+ hours...
100A+ will only happen at max acceleration and deceleration. Remember I have been running the home-made version Lithium on Gen2, Gen3 for more...
[ATTACH]
Here is your special one, no BS. that connectors and cable are corroded from all that KOH leak for the past 14 years, let me clean it up or maybe...
you don't need to cramp these lithium blade to charge/discharge. The only time it could swell is overcharge and trying to destroy the cells. The...
Good question, how service plug works is it connect to #10 block (Gen2) directly and cut the voltage in half when disconnect. since the Lithium...
There are 10 packs sending out to testers around the world, quite a few are on PriusChat so grab your seat and enjoy the show :)
It's testing time gentlemen !! [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
The display switching between voltage, Amp and some other information, we were in a power outage + 100 degree situation so didn't read the user...
