Separate names with a comma.
4 gallons of usable gas weighs around 24 pounds so I don't mind carrying that around. I see the fuel stop as an inconvenience so I try to minimize...
Any ideas about why the non-smart fob would function to start the car but not open the doors? In this case, the battery in the fob is new and the...
When I have one dot solid on the fuel guage, I can add at least 9 gallons (3 left in tank) which for me would be 120 miles, having driven about...
My 2007 gets 40 to 45 mpg in mixed driving. I usually fuel at 1 dot left on the gauge but I've never put more than 9 gallons in. Usually, this is...
Thanks for that info.
My 2007 has a key fob that has a black logo so I don't think it's a smart key. It can be used to start the car but it won't lock or unlock doors....
Self service yards are much less than that in my experience. 150 or 300...and the 300 place sometimes has half off specials. Core charges at both...
I used the Tech Stream procedure to bleed the brakes. While doing the left rear, the brake pump came on and dispensed a good deal of fluid thru...
I also have the red BRAKE letters which I'm thinking could be linked to ABS? Also, tire air pressure warning. The computer had the letters N/A...
So my big screwup was evacuating the brake fluid reservoir during the engine swap. Silly me...I thought it would be nice to replace the reservoir...
I don't think this is that big a deal but my rear seatbelts seem goofy. The latch/release assemblies for the left seat and center seat seem...
The latch found in the junkyard works well. I took pics of the old latch after taking it apart. With a light touch, I think this could be...
This one is 2007. It does have a small plastic square where a camera would fit and there's a plug I just saw tonight behind the square. The black...
I was posting in Gen 2 forum and it is Gen 2. The confusion comes in that I had worked on a Gen 3 before so that may be a profile thing? Anyway,...
I am sure the answer to this is somewhere here but can't see it. If I'm able to find a factory backup camera, can I just plug that into the...
My Gen 2 project made it's way to the sticky latch problem. I knew the latch didn't work but wasn't aware this is a common issue. On disassembly,...
What about moving the end modules to the middle and the middle ones to the ends due to prior heat buildup?
Likely if Gen 4 modules work, then Gen 3 would as well. I was thinking of moving the middle modules toward the ends on the theory that they've...
Wondering whether this experiment was done or whether anyone has more feedback on the idea of putting Gen 3 cells in a Gen 2 pack. My Gen 2 pack...
